Ford Ranger Stalling/Dying Issues

35 messages, Last post on Nov 23, 2009 at 12:17 PM

You are in the Ford Ranger Forum. Your Host is kcram

What is this discussion about? Ford Ranger, Electrical, Engine, Truck

#32 of 35 Re: 94 Ranger - engine quit while driving [tinydog2] by 1998lincoln Nov 01, 2009 (9:31 pm)
Replying to: tinydog2 (Mar 23, 2009 3:17 pm) I had a 94 Ranger, starting missing bad,went to AutoZone,I put on a new Mas Airflow Sensor.Runs great now,NO miss!
#33 of 35 Re: Random stalling 2003 ranger [rick2343] by bolivar Nov 01, 2009 (11:29 pm)
Replying to: rick2343 (Nov 01, 2009 8:11 pm) Well, on Cad Northstar, this symptom many times means the Crank Position Sensor is bad. Replies to this message: insanetang (Nov 16, 2009 5:59 am)
#34 of 35 stalling 1994 ranger [bolivar] by insanetang Nov 16, 2009 (5:59 am)
Replying to: bolivar (Nov 01, 2009 11:29 pm) I have a 94 ranger xlt 2.3 and when i get up and start it cold it starts up fine but as soon as i drive it and if i stall the vehicle will not start it takes about 2-3 min before starting it will go but not turnover after getting it to start then none of my signals work or my hazard light work. Then later on the signals will work. Any ideals as why it doesnt start right up after stall and why my signaland hazard lights stop working temporarly.
#35 of 35 99 ford ranger stalls when hot by pulidore1 Nov 23, 2009 (12:17 pm)
I have a 99 Ranger that stalls when hot. Hault says that a inexpensive part near the distributor is the culprit. The problem is My car does not have a distributor. Can someone help? Pulidore