Ask the Car People.SM


Jaguar XJ-Series Brake Issues

10 messages,  Last post on Jun 28, 2010 at 5:27 AM

You are in the Jaguar XJ-Series Forum.

What is this discussion about? Jaguar XJ-Series, Jaguar, Brakes, Sedan

Messages Page 2 of 2

#3 of 10 Low brake fluid by tworkda

Jul 07, 2008 (4:37 am)

Brake fluid is full but I’m still receiving a message indicating that I’m low on brake fluid. Also receiving the same message for radiator fluid.

#4 of 10 Re: Low brake fluid [tworkda] by djagman

Jul 25, 2008 (11:36 pm)

Replying to: tworkda (Jul 07, 2008 4:37 am)
IS THE CAR A JAG?WHAT YEAR WHAT MODEL WHAT ENGINE.ABS OR NO.USA OR NOT?CAN YOU OPEN THE HOOD?

#5 of 10 Re: Low brake fluid [djagman] by tworkda

Jul 28, 2008 (10:58 am)

Replying to: djagman (Jul 25, 2008 11:36 pm)
2001 XJ8 4.3 with the words (Jaguar)

#6 of 10 What to purchase for a brake job. by alpaca3

Jan 13, 2009 (1:33 pm)

I am purchasing parts for my mechanic to do a brake job on my 2004 XJ VDP. What parts do I purchase and what brands are the best to purchase. Thanks for any information.

#7 of 10 ASC & TRAC not available by ianh4

Dec 06, 2009 (8:18 am)

Hi,
Anyone found a solution to the "ASC Not Available" and "TRAC Not Available" messages? The ABS light also comes on. It's an intermittent fault. When the warning is on, the brakes still work fine and are smooth. When the car starts (usually after initial running and when warm) the warning does not appear but the ABS activates under any level of braking.
Cheers, Ian H

#8 of 10 Re: ASC & TRAC not available [ianh4] by allojohn

Dec 06, 2009 (10:50 am)

Replying to: ianh4 (Dec 06, 2009 8:18 am)
see messages #2741 & 2746 in XJ-series forum.

#9 of 10 ASC / Trac warning message on dash by ausiejag

Jun 26, 2010 (3:32 pm)

Hi, I am experiencing the same error message , but all systems seem to be working OK. Is this aneasy fix? What did you do?

#10 of 10 Re: ASC / Trac warning message on dash [ausiejag] by allojohn

Jun 28, 2010 (5:27 am)

Replying to: ausiejag (Jun 26, 2010 3:32 pm)
I fixed my problem by removing and sending the ABS unit to BBA remanufacturing in Taunton, MA. Getting the unit out is a bit tricky, it's very tight in there. It cost about $150 and I have had no problem since. There is a known fault with the unit and these guys fix loads for all sorts of different cars. I found them on ebay would you believe. Check them out at www.bba-reman.com or call (866) 573-2740

Messages Page 2 of 2

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement