Last post on Mar 07, 2011 at 1:40 PM
You are in the Hyundai Santa Fe
What is this discussion about?
Hyundai Santa Fe, SUV
#69 of 72 Re: Sun roof complaints [jotorres] MINE LEAKS! [mikky]
Mar 07, 2011 (8:19 am)
SIR / MADAM... (wouldn't want to ruin my 'Credibility' on this site... )
Did your '07 SF Sunroof leak to the extent that the water stained the headliner?
#70 of 72 Re: Sun roof complaints [jotorres] MINE LEAKS! [mikky] [strawberry1] [somedai1] [oscar_gata]
Mar 07, 2011 (7:55 am)
SIR / MADAM
#71 of 72 Re: No sunroof leakage here... :) [bambew]
Mar 07, 2011 (9:16 am)
Sirs / Madams... (must be 'Prim' and 'Proper' on this site you know... )
OH NO.... My 2011 Santa Fe Limited does leak at the sunroof when put through a 'high-pressure' Touchless carwash. No staining on the headliner as of yet though. Probably wont be either as the water drips into the slider track.
This morning, after going through the Touchless wash, I noticed again that it was leaking. It leaks at the side near the rear of the SR. When I got home I had a good look at the SR (on the outside) as to how it moved from the closed position, to the full open position, and back again. Did this for both the 'full open', and the 'vent' functions...
I noticed that when the SR closes from the full open position (auto close), the panel will seat fully down and then, ever-so-slightly, lift up on the back end. This does not leave the panel 'flush' with the roof line. I did this a few times with the exact same result... Now, when I put the panel up in the 'vent' (just the back part of the panel moves up about a quarter inch) position, there is no 'auto' close. Which is odd, as closing the panel from the 'full open' position, it 'auto' closes... Why would Hyundai not have the SR auto close from the 'vent' position???
Anyways, when closing the panel from the vent position (non auto), I can seat the panel 'FULLY' (flush with the roof) by releasing the switch before the panel went into that slightly-raised 'parked' position... The next time that I head to the carwash, I will put the SR in the 'flush' position and see if it leaks then... Will let you guys know the results...
It looks to me, that 'H' has designed the SR to 'park' in that, 'slightly-raised' position... When I go in for the first oil change, I will ask the Service Writer/Advisor and/or the Tech working on the vehicle, why this is. There must be a reason...
#72 of 72 Re: No sunroof leakage here... :) [bambew]
Mar 07, 2011 (1:40 pm)
"Now, when I put the panel up in the 'vent' (just the back part of the panel moves up about a quarter inch) position, there is no 'auto' close."
It looks like the panel moves a quarter inch from the inside of the vehicle, but today, while checking it out on the outside, it is about an inch that the panel opens...