Sign In Join 



Chevrolet Blazer Engine and Performance Problems

142 messages,  Last post on Nov 11, 2009 at 9:09 PM

You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester

What is this discussion about? Chevrolet Blazer, SUV


Messages Page 6 of 15
1
...
3
4
5
6
7
8
9
...
15
Prev
Next
Last
Go To Msg #
Search This Discussion

#48 of 142
Re: Chirping Gates serpentine belt fix [53jinx] by jlflemmons
Apr 10, 2007 (5:58 am)
Reply

Replying to: 53jinx (Apr 10, 2007 5:25 am)

Glad to help. It has to be one of the oddest noise producers I have ever seen.
 
Jim
#49 of 142
Re: Chirping Gates serpentine belt fix [jlflemmons] by steve_ HOST
Apr 10, 2007 (7:41 am)
Reply

Replying to: jlflemmons (Apr 10, 2007 5:58 am)

I love solutions like this. You should write up a CarSpace Guide about it so the cure will get even more Google hits.
#50 of 142
Re: Chirping Gates serpentine belt fix [jlflemmons] by rmizell
Jul 20, 2007 (2:34 pm)
Reply

Replying to: jlflemmons (Apr 06, 2007 5:56 am)

Thanks man. I have been dabbling in cars for many years and would have never caught this one. I was starting to hear the noise in my sleep.
#51 of 142
Chirping Gates serpentine belt by chrisd1970
Jul 22, 2007 (3:17 pm)
Reply
I have a 1999 GMC Jimmy and when I first start it up and while I am idling it makes a chirping noise but once I give it the gas it seems to go away could this be my problem also? thanks
#52 of 142
Re: Chirping Gates serpentine belt [chrisd1970] by jlflemmons
Jul 22, 2007 (5:45 pm)
Reply

Replying to: chrisd1970 (Jul 22, 2007 3:17 pm)

Very possible. Another source could be the bearing in the idler pulley, but checking the belt is easy. Just find the labels on the belt (remember, there are two locations) and put a little silicon grease or even liquid soap on them. If the sound changes, you have found your noise.
 
BTW, the belt I put on that started this thread has finally shut up.
#53 of 142
Re: Chirping Gates serpentine belt [chrisd1970] by steve_ HOST
Jul 22, 2007 (5:50 pm)
Reply

Replying to: chrisd1970 (Jul 22, 2007 3:17 pm)

You don't mention how long you've been hearing the chirp, but it seems like the paint on the belt would wear off after a while and the chirp would go away on its own.
 
Or maybe it's especially good quality paint that doesn't wear off?
#54 of 142
Re: Chirping Gates serpentine belt [steve_] by chrisd1970
Jul 24, 2007 (3:07 pm)
Reply

Replying to: steve_ (Jul 22, 2007 5:50 pm)

Thanks for your help. I had the Idler pulley replace on 5-24-07 the serpentine belt that same day and the serpentine nelt tensioner on 2-22-07. I will be taking it in once again to have the chirping checked again . I have just over 92000 miles on my 1999 jimmy. I think it might be time to start looking for a new car.
#55 of 142
Re: Chirping Gates serpentine belt [jlflemmons] by chrisd1970
Jul 24, 2007 (3:09 pm)
Reply

Replying to: jlflemmons (Jul 22, 2007 5:45 pm)

thanks for your help I'll be having it checked
#57 of 142
How do I remove the starter in my 01 blazer by delk77
Jul 08, 2007 (5:53 pm)
Reply
I have an 01 Chevy Blazer. After I went muddin I went to the local watering hole to cool off with some suds and when I left the truck wouldnt start. It's definatley the starter. I removed the 2 bolts and the starter is loose but I cant remove the 2 wires or get the starter out. I need about an extra 1/4 inch of space. I also tried to remove it through the half flap in the wheel well with no joy. Can anyone tell me how to remove it soI can take it apart and clean it or replace it if I need to? I'm so lost.

Messages Page 6 of 15
1
...
3
4
5
6
7
8
9
...
15
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement