173 messages,
Last post on May 17, 2013 at 5:35 PM
You are in the
Chevrolet Blazer Forum.
What is this discussion about?
Chevrolet Blazer, SUV
#1 of 173 Chevrolet Blazer Engine and Performance Issues
by tidester
Oct 05, 2007 (12:46 am)
I am consolidating many of the topics that deal with engine related issues and engine performance.
tidester, host
SUVs and Smart Shopper
#3 of 173 1995 Blazer 4.3 4wd Clicking noise?Misfiring?
by noluck102
Sep 30, 2007 (5:42 am)
The other day my rpms starting jumping up and down.Couldn't get any acceleration. It would keep puttering. Open the hood and heard what it seemed like clicking coming from a solenoid but I couldn't tell.If I would replace the spark plugs and wires would this solve this problem.The car has over 130,000 miles on it.Everything else works but oil gauge will not work.And also before this I had the oil lines breaks loose which was very messy of course about 8 months ago and had it fixed so its not that. Blazer won't start now and when I opened the oil cap smoke came out of the engine. I just changed the oil about 2 weeks prior and also I have been getting poor gas mileage. Any suggestion on what to do because right now blazer is stranded. Thanks need help....
#4 of 173 Also could it be fuel pump??
by noluck102
Sep 30, 2007 (6:27 am)
Also could it be the fuel pump not sending gas to the engine could that be the clicking noise?
#5 of 173 also gauges...
by noluck102
Sep 30, 2007 (8:53 am)
Also gauges all come on except for the oil gauge reads empty and there is no oil everywhere so nothin blew and oil is full...
#6 of 173 Chevrolet Blazer O2 Sensors
by grose69
Sep 28, 2007 (7:48 am)
#7 of 173 O2 sensor locations
by grose69
Sep 27, 2007 (11:44 am)
Does anyone know where each of the O2 sensors are located on a 95 Blazer with the V6 Vortec.
#9 of 173 Chevrolet Blazer Throttle Issues
by aallen2
Sep 26, 2007 (1:41 pm)
#10 of 173 01 Chevy Blazer
by aallen2
Aug 30, 2006 (8:36 pm)
My blazer is a standard shift where the motor reves when I go to switch gears. What could this be and about how much is it to fix?