Ask the Car People.SM


Ford Explorer Transmission Questions

383 messages,  Last post on May 08, 2013 at 12:11 PM

You are in the Ford Explorer Forum.

What is this discussion about? Ford Explorer, Ford Explorer Sport, Ford Explorer Sport Trac, Transmission, SUV

Ford Explorer Transmission Questions

Messages Page 32 of 39

#311 of 383 Re: 2007 Ford Explorer Transmission [jsaper] by mike_pabros

Aug 30, 2011 (8:36 am)

Replying to: jsaper (Aug 30, 2011 6:07 am)
No it's not a trans fan. It's making a little ticking noise on the trans. I talked to the ford dealer and they said I shoulnt have change the transmission oil if it wasn't done regularly. The sludge on the transmission was keeping the gears together. I talked to several mechanic and they said the same. But it still doesn't make sense to me why this would happen. I added some Lucas transmission additive and it seems to help. But I really have to warm up the truck and drive it around before I can drive it on the street. This is what has to happen when it's cold. Thank you so much for responding.

#312 of 383 Re: Ford Explorer transmission problems [07imanexplorer] by tupimell

Sep 11, 2011 (6:48 pm)

Replying to: 07imanexplorer (Jul 30, 2010 6:25 am)
saludos, vivo en venezuela y tengo una ford explorer eddie bauer V8 2008 con un problema similar, el golpe de la caja, acudi a muchos concesionarios o agencias y siempre me dijeron que ese golpe era normal y ademas que no habia forma de quitarselo hasta que me comunique con FORD de VENEZUELA a traves de su pagina web y en pocos dias me llamaron para enviarme a un taller especifico donde me resolverian el asunto y realmente fue asi, despues de casi 3 aņos la camioneta definitivamente es otra, les cuento que le reactualizan el soft ware y para ello cuando se le esta cargando, la camioneta debe ser manejada durante al menos 15 minutos en una via totalmente plana sin frenar para que la computadora aprenda a cambiar sin brusquedad y debe ser manejada por un tecnico que tenga oido con el motor para asi acelerarla de manera adecuada y cambie apropiadamente, esto debe hacerlo 3 o 4 veces, en defecto de la via libre y plana, realizan el procedimiento sobre un puente dinamico que solo talleres bien especializados lo tienen. Por ello le recomiendo que se comuniquen con FORD pues seguro le resuelven el asunto.

#313 of 383 Re: Ford Explorer transmission problems [tupimell] by kirstie_h HOST

Sep 12, 2011 (6:05 am)

Replying to: tupimell (Sep 11, 2011 6:48 pm)
The member above lives in Venezuela and has a 2008 Ford Eddie Bauer V8 with a similar problem - the thunking - and he also went to many shops where they told him it was normal and there was no way to fix it. Then he contacted Ford of Venezuela via their website and they called him and send him to a specific shop where, after 3 years of having this problem, he was told that you need retrain the software by driving the truck for at least 15 minutes on a totally flat surface, without braking, so that the computer can learn to change without abruptness. This should be handled by a technician who can hear the motor and ensure that it is accelerating and changing properly. This may have to be done 3-4 times, and in the absence of a free & flat surface, specialized mechanics have equipment to replicate this.
 
He highly recommends contacting Ford to resolve this situation.

#314 of 383 Re: Ford Explorer transmission problems [kirstie_h] by nvbanker

Sep 12, 2011 (8:24 am)

Replying to: kirstie_h (Sep 12, 2011 6:05 am)
I wish that worked, but having had one of these transmissions, I sincerely doubt it. Mine had to be frequently reflashed to resolve the problem, which it would do, only to recur in a few thousand miles. It was leased, so I let it go back, but my friend bought it, and has had the continuing problem. Having owned 8 Explorers, most of them being excellent vehicles, in my opinion, once you get one with a bad transmission, you may as well get rid of it, they seem to be cursed with no long term remedy. I've had two of them, an 04, and an 06.

#315 of 383 1997 Explorer AWD - Loud Noise on Speed Reduction by msmyers73

Nov 05, 2011 (4:55 pm)

OK, let me preface this with I have 232,000 miles on my Explorer and no complaints or problems (knock on wood). That said, starting a few days ago when I disengage the cruise or let off the gas at over 40 mph it makes a whining sound almost like a gear spinning or turbocharger sounds. If I tap the accelerator it stops. Know it has to be in the transmission or torque converter. Any thougths?

#316 of 383 Re: 1997 Explorer AWD - Loud Noise on Speed Reduction [msmyers73] by nvbanker

Nov 07, 2011 (11:51 am)

Replying to: msmyers73 (Nov 05, 2011 4:55 pm)
My only thought is, if you have 223,000 on it, it has served you very well. Sounds like my first Explorer, 1994, and my best one. Went 150,000 miles with only one problem. Eventually the shift motor for the 4WD went out.
 
But I digress.....

#317 of 383 Re: 1997 Explorer AWD - Loud Noise on Speed Reduction [nvbanker] by msmyers73

Nov 07, 2011 (2:13 pm)

Replying to: nvbanker (Nov 07, 2011 11:51 am)
Thanks nvbanker! Good info and it is a fix I may attemptmyself. Appears pretty straight forward and I have been playing with cars all my life. You were a great help!

#318 of 383 How do i check trani fluid pressure on a 02 Ford Explorer XLT? by miss_nikki

Nov 10, 2011 (12:32 pm)

Hi everyone! I hope everybody's doing great!
 
Can anyone tell me how i can check the transmission fluid pressure on a 2002 Ford Explorer XLT?
I just found out how complicated it is to put the trani fluid in to this car, so i would like to check the pressure first =)
I think the fluid is low, but I'm not 100% sure...
 
It would be great if somebody could help me, thank you!

#319 of 383 Re: How do i check trani fluid pressure on a 02 Ford Explorer XLT? [miss_nikki] by windcatcher066

Nov 14, 2011 (3:55 pm)

Replying to: miss_nikki (Nov 10, 2011 12:32 pm)
Miss Niki,
 
I think you want to check your fluid level? To do this make sure the vehicle is level and at operating temp. . On the transmission pan is a large hex with a smaller plug(may be allen or torx head)inside. Remove the inner plug and fluid should drip out. If it does not add the correct fluid until it does. (refer to manual, I believe its MerconV). To add fluid you will need something to force the fluid against the forces of gravity and through that small hole. This would be beneficial to do this because at this point you can add fluid. To check the pressure you would need an expensive pressure gauge(which you will probably never use again) and be unplugging and plugging an area that might leak, and you can not add fluid at this location. A pressure reading may indicate an extremely low level, but not necessarily the correct operating level.

#320 of 383 Intermittent Emty fuel guage on 2005 Mountaineer by windcatcher066

Nov 14, 2011 (3:44 pm)

I have a 2005 Mercury Mountaineer which the fuel gauge intermittently reads empty. It is a 4.0 flex fuel model. I have read posts about 2002 models needing wiring kits or flex fuel modules to correct this. Anybody know where to start on this model?

Messages Page 32 of 39

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement