Turn Signals that activate the wrong side

8 messages, Last post on Nov 03, 2009 at 9:20 AM

What is this discussion about? Chrysler Town and Country, Chrysler, Van

#6 of 8 Re: Turn Signals that activate the wrong side [steve_merc] by sluggo333 Nov 02, 2009 (7:21 am)
Replying to: steve_merc (Nov 01, 2009 5:28 pm) Yes..it was my multi-function switch that can only be purchased at the dealer. $75.00 for the switch and $127.00 in labor. They have to drop the stearing column down to get to the switch. Hope this helps. Don Replies to this message: steve_merc (Nov 02, 2009 6:27 pm) sluggo333 (Nov 03, 2009 9:20 am)
#7 of 8 Re: Turn Signals that activate the wrong side [sluggo333] by steve_merc Nov 02, 2009 (6:27 pm)
Replying to: sluggo333 (Nov 02, 2009 7:21 am) Don, thanks, before I got your reply, I stopped by Autozone and they could order the multi function switch for $50. It be here till tomorrow. They way you make it sound is that I should let a pro install it. I am pretty mechanical but not a pro. Whats your take? thanks Steve Replies to this message: sluggo333 (Nov 03, 2009 9:20 am)
#8 of 8 Re: Turn Signals that activate the wrong side [steve_merc] by sluggo333 Nov 03, 2009 (9:20 am)
Replying to: steve_merc (Nov 02, 2009 6:27 pm) Steve, mine is an 06 that's prob why they don't carry it at Autozone or Advanced. I tried NAPA and they told me it was dealership. They had to drop my steering column to change mine. Your's may not have to...if you can check a book on it's installation or call your dealership they might be able to tell you. I do know alot of stuff goes through that switch. Good luck with it, Don