You are here:
Forums
Vans & Minivans
Chrysler Town & Country/Dodge Grand Caravan
Turn Signals that activate the wrong side

8 messages, Last post on Nov 03, 2009 at 9:20 AM
You are in the Chrysler Town & Country/Dodge Grand Caravan Forum. Your Host is Karens
|
|
|---|---|
| Assuming that the switch is wired correctly with the previous problem. Not sure if this helps but I worked on a 99 T&C where the left turn signal would not work at all. Solution was to disconnect the main wiring from the body control module and then reconnect. During my investigation I had found no power coming from the BCM to the switch. As these vans get older, it maybe a requirement to disconnect and reconnect the BCM as corrosion may build up on the connections affecting the signals to the BCM. However caution will be needed when doing this so as not to trigger the air bags. | |
| Turn signals work most of the time then won't work at all...or turn the left one on and the right one works and vise versa...andyone else with this issue? | |
|
|
|
Replying to: KarenS (Oct 02, 2007 10:04 am) thanks Steve
|
|
|
Replying to: steve_merc (Nov 01, 2009 5:28 pm) Don
|
|
|
|
|
Replying to: sluggo333 (Nov 02, 2009 7:21 am) thanks, before I got your reply, I stopped by Autozone and they could order the multi function switch for $50. It be here till tomorrow. They way you make it sound is that I should let a pro install it. I am pretty mechanical but not a pro. Whats your take? thanks Steve
|
|
|
Replying to: steve_merc (Nov 02, 2009 6:27 pm) Good luck with it, Don |
|
You are here:
Forums
Vans & Minivans
Chrysler Town & Country/Dodge Grand Caravan
Turn Signals that activate the wrong side
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chrysler Town and Country



Browse by Board
Browse by Topic
Today's Chats