Sign In Join 



Lincoln LS Door Handle

13 messages,  Last post on Jan 23, 2009 at 3:03 PM

You are in the Lincoln LS Forum. Your Hosts are pat & karens

What is this discussion about? Lincoln LS, Sedan


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#4 of 13
My door Handle by victoria351
Nov 06, 2007 (8:01 am)
Reply
Hello,
 
I seem to be having the same problem, my door handle is broken from the inside. Anyone know where I can get one for a 2000 Lincoln LS.
 
Thanks,
Victoria
#5 of 13
Re: My door Handle [victoria351] by gottiz
Nov 06, 2007 (8:16 am)
Reply

Replying to: victoria351 (Nov 06, 2007 8:01 am)

the only place really your going to find one is a dealer, i tried everywhere with no success. Junkyards generally will not just give you the doorhandle at least the ones i went to didn't they said something about if the doors good they'd rather sell the entire door.
 
Sorry,
 
#6 of 13
Re: My door Handle [gottiz] by victoria351
Nov 07, 2007 (7:57 am)
Reply

Replying to: gottiz (Nov 06, 2007 8:16 am)

I guess your right, that is really my only option. Is there a website I can check out to see how much a new door handle will cost. I can't even pass inspection. The handle is actually broken from the inside. It is very humorous trying to watch me get out of the car. I have to either jump out the passenger side, or roll down the window and try to lug the heavy door open with both hands.
#7 of 13
Re: My door Handle [victoria351] by gottiz
Nov 07, 2007 (8:56 am)
Reply

Replying to: victoria351 (Nov 07, 2007 7:57 am)

haha, yeah i had to do the same thing, good thing you didn't have it go out in winter where your windows freeze to the door.
#8 of 13
Chrysler Sebring 9 Months for drivers side inside door handle by partsmia
Feb 22, 2008 (2:38 pm)
Reply
I have contacted Chrysler customer support regarding this 9 months ago and am still waiting. They put me on a Priority status. Still no door handle. They keep saying I will have one the following month. Turns out there are over 250 of us who do not have inside drivers door handles and they are back to saying again it will be another month. The local dealer told me that the place that used to manufacture the part went out of business and they are looking for a new manufacturer and I should have the handle next month. This has been going on for 9 months. All I want to do is sell this sucker. I had to replace the transmission at 50,000 miles I am going back to foreign made. At least they stayed together and ran. I have checked junk yards and after market parts companies to no avail. And Chrysler wonders why they are in financial trouble If anyone knows of where to get this handle let me know. It is a 2002 Sebring convertible and I don't care if the handle is not chrome at this point I will take anything.
#9 of 13
Re: Chrysler Sebring 9 Months for drivers side inside door handle [partsmia] by jeyhoe
Feb 22, 2008 (12:16 pm)
Reply

Replying to: partsmia (Feb 22, 2008 2:38 pm)

Now, gottiz, see why I asked you that question?
#10 of 13
Doesn't All This. . . by cdnpinhead
Feb 22, 2008 (5:50 pm)
Reply
just make you so proud to drive one of these?
 
In fact, on my list of 3 or 4 things that I absolutely have to do before I can sell my '00 LS, is replacing the driver's inside door handle. I've got fairly strong hands and have figured out how to get the door open without running the window down so I can reach the outside handle, but my wife doesn't have the required hand strength. The good news is that I bought the replacement part about a year ago, shortly before I figured out that I could make the door open without going through all the joy that's involved in the replacement. There's drilling out of rivets (and retrieving the pieces in the recesses of the door) involved. Oh boy.
 
It's such a joy explaining to her how to get out of my "luxury" car that I was so pumped up on 8 years ago.
#11 of 13
Re: Doesn't All This. . . [cdnpinhead] by jeyhoe
Feb 22, 2008 (6:23 pm)
Reply

Replying to: cdnpinhead (Feb 22, 2008 5:50 pm)

Geez. Hadn't even heard of this issue before. So the "chrome" cough cough wink wink inner door handle is prone to breaking off? That would s*ck. And sounds like replacing it is another of Ford's better ideas? It's not just held in by a pin or something? You gotta drill out rivets? ARRGGH
 
Incidentally, my wife got rear ended in our LS on the way home tonite. She's fine. It was just a slow bash in the rear bumper. THis is the 3rd time the rear's had to be fixed on this car. I got rearended once by a guy doing about 50 mph. That hurt. And the third time, I backed into one of those 3 foot high concrete poles that keep u from backing into the gas pump!
#12 of 13
door handle by inztagatah
Jan 18, 2009 (8:39 am)
Reply
my handle broke as well they want 180.00 at the dealer ship. at first i tied a little string around it but after a while i learned that if you pull whats left of the handle than use ur thumb and pointer finger you can open it with the lock by putting your thumb on the innerside ( * ) and your pointer finger on the outer side ( )* put you pointer finger behind the lock for leverage pretty much your using the lock as a handle but it works just be sure to pull the handle also
 
stars indicate where to put your fingers
 
                                      ( *lock )*
                                      ( door handle)
#13 of 13
Re: door handle [inztagatah] by explorerx4
Jan 23, 2009 (3:03 pm)
Reply

Replying to: inztagatah (Jan 18, 2009 8:39 am)

ford still uses the same piece is the fusion/milan.

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement