Sign In Join 



Mitsubishi Outlander Navigation and Electronics

274 messages,  Last post on Nov 25, 2009 at 4:53 PM

You are in the Mitsubishi Outlander Forum. Your Hosts are steve_ & tidester

What is this discussion about? Mitsubishi Outlander, SUV


Messages Page 24 of 28
1
...
21
22
23
24
25
26
27
28
Prev
Next
Last
Go To Msg #
Search This Discussion

#224 of 274
How to find Sirius ID Code on Outlander XLS? by kool_kallvin
May 22, 2007 (1:49 pm)
Reply
#225 of 274
How to find Sirius ID Code on Outlander XLS? by kool_kallvin
May 22, 2007 (12:06 pm)
Reply
I own a 2007 Outlander XLS model (canadian version), I'm trying to find the Sirius ESN Id so I can activate the Satelitte Radio Service but I'm not able to find it?
 
I followed instruction in the Owner Manual but this did not work as I never get the Sat option to display on the Screen, I only get AM/FM even if button says AM/FM/Sat.
 
Does anyone know if the Sirius feature is included in the Canadian Edition of the Outlander? The dealer said it was, I just had to follow instruction in manual.
#226 of 274
Re: How to find Sirius ID Code on Outlander XLS? [kool_kallvin] by rcpax
May 22, 2007 (1:49 pm)
Reply

Replying to: kool_kallvin (May 22, 2007 12:06 pm)

Does anyone know if the Sirius feature is included in the Canadian Edition of the Outlander? The dealer said it was, I just had to follow instruction in manual.
 
AFAIK, Sirius is not available as an option for the Canadian 07 Outlanders, not even with the HDD/Ent pack for XLS, so that would explain why you don't have the Sat option. Don't rely too much on the dealers, you probably know more than them.
#228 of 274
Radar detector wiring - fuse box layout by budh
Apr 16, 2007 (1:41 pm)
Reply
I've been attempting to wire up my Valentine One radar detector in my new Outlander XLS 4WD.
 
In the past, I have usually found a fuse for some non-vital system (for the Outlander, I chose the 20 ampere sunroof fuse #15), remove the fuse, wrap the positive power wire of the radar detector around one of the two fuse leads, and reinstall the fuse allowing the positive lead wire to be making contact with the one of the two contacts on the fuse female openings.
 
And the negative wire attached to any ground on the vehicle body.
 
I thought I had it working until I turned off the ignition and the radar detector stayed on! Not sure why, since the sunroof presumably has no power unless the ignition is on.
 
I know this is a crude method - but maybe someone with more electrical background why the detector stays powered with the ignition off. (The positive wire is in the lower opening of the 20A sunroof fuse.)
 
Now if someone knew a specific wire near the fuse box that has power only with the ignition on, I could put one of those special clamps over the wire to make contact and connect the positive wire to that.
 
Anyone know any good secrets in general on how to wire a radar detector so it is out of the way and relatively unseen?
 
Bud H
#229 of 274
Re: Radar detector wiring - fuse box layout [budh] by mictra
Apr 27, 2007 (9:53 am)
Reply

Replying to: budh (Apr 16, 2007 1:41 pm)

Bud:
 
I'm pretty sure the sunroof and windows stay powered for a set amount of time after the car is turned off to allow you to close any open windows or the sunroof. Does the detector eventually go off after 30 or 45 seconds?
 
Michael
#230 of 274
how to remove the radio? by random42
Mar 30, 2007 (6:48 am)
Reply
#231 of 274
how to remove the radio? by random42
Mar 25, 2007 (10:20 am)
Reply
I have the Outlander LS with the base radio and I am trying to figure out how to remove it or at least get access to the back. I want to install a Sirius FM Direct Adapter and need access to the antenna plug.
Anyone have any idea on how to gain access?
 
Thanks
#232 of 274
Re: how to remove the radio? [random42] by spaceman210
Mar 25, 2007 (1:44 pm)
Reply

Replying to: random42 (Mar 25, 2007 10:20 am)

I don't know, but you can ask a dealer's technician or see if MBNA will sell you a service manual. I always buy one with a new vehicle; even if only used a few times, it can easily pay for itself in labor cost avoidance for simple things like that.
#233 of 274
Re: how to remove the radio? [random42] by djlono
Mar 26, 2007 (8:48 am)
Reply

Replying to: random42 (Mar 25, 2007 10:20 am)

http://www.mitsubishiforum.com/m_124086/tm.htm
It should be similar for the base radio.

Messages Page 24 of 28
1
...
21
22
23
24
25
26
27
28
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement