Jeep Grand Cherokee Electronics and Navigation

66 messages, Last post on Sep 03, 2009 at 1:13 PM

#62 of 66 Re: speakers [brad423] by 4x4jeep Jul 03, 2009 (10:03 pm)
Replying to: brad423 (Aug 31, 2007 4:05 am) it is possible the wires are loose in the back of the steerio or something is rubbing, when the dash is installed at the factory the radio is already in the dash and they slam it home. the wires or bundles could be hitting the dash superstructure. check out the harness for routing and wire heath when you pull the radio out. good luck
#63 of 66 Re: resetting computer after service [ptahrek] by 4x4jeep Jul 03, 2009 (10:06 pm)
Replying to: ptahrek (Oct 11, 2006 5:39 pm) another meathod is to push the throttle down to the floor 3 times when you first turn on the ignition. if it registers the jeep will beep at you and then turn off the message. good luck
#64 of 66 Re: OEM Navigation modification off doad use only [coolrider] by 4x4jeep Jul 03, 2009 (10:11 pm)
Replying to: coolrider (Jun 24, 2007 3:17 pm) unfortunitely that can only be done by software change.
#65 of 66 Re: 2002 Grand Cherokee Stock Audio System [chaseavec] by 4x4jeep Jul 03, 2009 (10:17 pm)
Replying to: chaseavec (Jun 20, 2007 10:40 pm) to the best of my knowledge that answer is no, your steering controls use 6 different voltages to preform there function, so i am not sure how you can use them for tieing into any rear seat modifications good luck
#66 of 66 fuses by papa10 Sep 03, 2009 (1:13 pm)
Turn signals and air conditioner quit while driving down road. Any ideas, Fuses?