You are here: Forums SUVs Jeep Cherokee and Jeep Grand Cherokee Jeep Grand Cherokee Electronics and Navigation

Jeep Grand Cherokee Electronics and Navigation

66 messages,  Last post on Sep 03, 2009 at 1:13 PM

You are in the Jeep Cherokee and Jeep Grand Cherokee Forum. Your Hosts are steve_ & tidester

What is this discussion about? Jeep Grand Cherokee, Jeep Grand Cherokee SRT-8, Jeep Cherokee, SUV

Messages Page 3 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

#17 of 66 Re: Radio Failure - no sound [sshakkour] by sshakkour Aug 17, 2007 (11:30 am)
Replying to: sshakkour (Aug 14, 2007 9:45 am) it just happened that yesterday my son opened the right back door for the jeep and the sound came on and then when he closed the door the sound went off; after doing that for a couple of times i figured that the wires that ran through the door are being pinched some how ; so i just wiggled the lines and every thing is working fine now .
#18 of 66 Re: Radio Failure - No Sound [pensfan71] by sshakkour Aug 17, 2007 (11:33 am)
Replying to: pensfan71 (Apr 07, 2007 7:37 am) read message no. 7 it might help
#19 of 66 amplifier by dwest2 Aug 25, 2007 (7:46 am)
I think the amp under the back seat isn't working. Probably my daughter blew it out.The sound for the radio comes from the 2 front speakers in the doors only. It's real muffled and basey sounding. Anyone had the prob
#20 of 66 Jeep Cherokee/Jeep Grand Cherokee: resetting computer after service by ptahrek Aug 19, 2007 (8:18 pm)
#21 of 66 resetting computer after service by ptahrek Oct 11, 2006 (5:39 pm)
I just had my 95 jeep grand cherokee serviced and I am trying to reset the screen to 3000 miles until next service but I can't seem to get it to reset any suggestions Replies to this message: jtankersley77 (Dec 18, 2006 11:13 pm) xscout (Dec 19, 2006 10:22 am) 4x4jeep (Jul 03, 2009 10:06 pm)
#22 of 66 Re: resetting computer after service [ptahrek] by jtankersley77 Dec 18, 2006 (11:13 pm)
Replying to: ptahrek (Oct 11, 2006 5:39 pm) I have a 95 and I dont remeber the sequence. I think you have to hold down both buttons when you start it up. Something like that. Keep holding untill it resets. If that doesnt work hold down just one keep tryg untill it resets. It is something like that.....
#23 of 66 Re: resetting computer after service [ptahrek] by xscout Dec 19, 2006 (10:22 am)
Replying to: ptahrek (Oct 11, 2006 5:39 pm) Press the "select" button until the mileage shows and then hold the "set" button until it resets.
#25 of 66 JGC Nav System Upgrade by kgvw Jul 11, 2007 (12:29 pm)
#26 of 66 JGC Nav System Upgrade by kgvw Jul 11, 2007 (12:29 pm)
I just purchased the new Navteq DVD upgrade for my 05 JGC Nav system.   Low and behold the powers of intellegence decided to remove all the "clutter" from the nav screen. Clutter being the street names you normally look for when driving.   I can no longer drive down a street and look at the screen to find the street I'm looking for without actually using the joy stick to highlight a street and let it tell me what I'm looking at.   Unfortunately the DVD upgrades the firmware and is no longer backwards compatable.    I discussed this with Navteq, (claims they only write software based on requirements from chrysler),   Alpine (radio mfgr who claims they only supply the hardware) and Chrysler who claims they have no fix because Navteq supplied the software and Alpine supplied the radio... so call them or the Jeep dealer who never heard of any fixes at all, so call Chrysler.   DOES ANYONE HAVE ANY SUGGESTIONS??? Right now I have a $1600 DVD/Radio with a very large screen that doesn't help me locate anything.   Thanks for any help.

Messages Page 3 of 7 1 2 3 4 5 6 7 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Jeep Cherokee and Jeep Grand Cherokee Jeep Grand Cherokee Electronics and Navigation