Sign In Join 



M35 automatic daytime running lights

6 messages,  Last post on Nov 11, 2007 at 10:49 AM

You are in the Infiniti M35/M45 Forum. Your Hosts are pat & karens

What is this discussion about? Infiniti M35, Electrical, Sedan


Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion

#3 of 6
Re: M35 automatic daytime running lights [blueyfish] by osbornkg
Aug 17, 2007 (8:43 am)
Reply

Replying to: blueyfish (Aug 16, 2007 7:40 pm)

Funny Infiniti would say the installation of a safety feature would void the warranty. Would this mean while traveling in Canada the USA warranty is void because you don't have the control box installed?
What does drl mean?
Did you get a Part Number for the control box?
Is the control box all that is needed or is there other wiring involved.
Did you call Infiniti or your Infiniti dealer?
#4 of 6
Re: M35 automatic daytime running lights [blueyfish] by james27
Aug 17, 2007 (2:51 pm)
Reply

Replying to: blueyfish (Aug 16, 2007 7:40 pm)

What happens when you have the daytime running lights (drl) is as follows:
DAYTIME LIGHT OPERATION
With the engine running, the lighting switch in the OFF or AUTO position (headlamp is not illuminate) and
parking brake released, the IPDM E/R receives input request signal from BCM to turn on daytime light. This
input is communicated across the CAN communication lines. The CPU of the IPDM E/R controls the daytime
light relay coil. When energized, this relay directs power
● through daytime light relay terminals 5 and 3
● through front combination lamp RH terminal 2
● through front combination lamp RH terminal 6
● through IPDM E/R terminal 27
● through 10A fuse (No. 72, located in IPDM E/R)
● through 10A fuse (No. 74, located in IPDM E/R)
● through IPDM E/R terminal 28
● to front combination lamp LH terminal 6.
Ground is supplied
● to combination lamp LH terminal 2
● through grounds E22 and E43.
With power and grounds supplied, the daytime lights illuminate. The high beam headlamps are now wired in
series and illuminate at a reduced intensity.
 
So, as you can see, it is fairly complicated. Not sure if all of the stuff is there, or if it is easily handled by say maybe just replacing a relay. Because much of this is controlled by the computer, not sure how much really needs to be added or how.
#5 of 6
Auto Door Locks M35 by grer58
Nov 11, 2007 (10:49 am)
Reply
I am trying to have the doors lock when I put the car into Drive and unlock when I put it into Park or.... lock when I push the ignition switch. My dealer tried but couldn't do it and returned my $$$$$....... Any suggestions?????? I don't want to "Void the Warranty by doing something stupid... Oh If I can do it thru my Infiniti font that would be a plus.

Messages Page 2 of 2
1
2
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics
Advertisement