You are here:
Forums
Sedans
Mazda6
Mazda6 Oil Consumption
Mazda6 Oil Consumption
40 messages,
Last post on Mar 02, 2008 at 4:36 PM
You are in the Mazda6 Forum.
Your Hosts are pat & karens
What is this discussion about?
Mazda MAZDA6, Oil, Sedan
- #39 of 40
-
Re: Mazda 6 Oil Consumption [mazda6owner]
by jkeef2
-
Mar 01, 2008 (8:49 pm)
-
|
|
Replying to: mazda6owner (Mar 01, 2008 1:27 pm)
I had no luck with the dealer or factory rep. I took it upon myself to fix the rod bearings that were damaged so that I could trade the car in and buy another vehicle. Total cost for the repair was around $70 And 4 hours labor. Hopefully this might be an option for you if the engine still runs.
|
- #40 of 40
-
Re: Mazda 6 Oil Consumption [jkeef2]
by jbah
-
Mar 02, 2008 (4:36 pm)
-
|
|
Replying to: jkeef2 (Mar 01, 2008 8:49 pm)
Just to re-cap my situation. I did get a new engine out of mazda b/c 2 cylinders were showing a depreciation in compression. This was less than 40k miles. They wanted proof of my oil changes. Also, the clutch is making a strange noise again. This is after they replaced the clutch at 20k miles. I certainly wouldn't buy a mazda that is built in the US b/c the Japan versions didn't have these problems. I still feel like they should fix the clutch but I'm out of warranty and they already refused to honor anything else. They also had to fix the tranny mount and leaky axle seal after the engine swap. I don't know what to say really, other than MAZDA SUCKS. Thank G*($ though they honored repairs but why should you have to take in your brand new car five times a year for four years?!!?!?!
|
You are here:
Forums
Sedans
Mazda6
Mazda6 Oil Consumption