Sign In Join 



Article Comments - 2008 Subaru Impreza WRX vs. 2007 Mazdaspeed 3

146 messages,  Last post on Dec 27, 2007 at 3:11 PM

You are in the Mazda3 Forum. Your Host is pf_flyer

What is this discussion about? Subaru Impreza WRX STi, Mazda MAZDASPEED MAZDA3, Car Comparisons, Hatchback, Sedan

Article comments for
Comparison Test: 2008 Subaru Impreza WRX vs. 2007 Mazdaspeed 3 - Although the Subaru's 5.9-second 0-60 time is two ticks better than the Mazda's 6.1-second clocking, it's all due to its traction advantage at launch. By the end of the quarter-mile, the two cars are dead even at 14.5 seconds and the Mazdaspeed 3 is going 98.7 mph compared to the WRX at 94.4 mph. Considering the difference in power ratings, none of this is surprising. (more)


Messages Page 14 of 16
1
...
10
11
12
13
14
15
16
Prev
Next
Last
Go To Msg #
Search This Discussion

#124 of 146
Re: The Hits Just Keep On Coming II [merrycynic] by tiff_c
Dec 22, 2007 (8:58 pm)
Reply

Replying to: merrycynic (Dec 22, 2007 8:20 pm)

Man, you weren't kidding when you said you drive more miles than most! I thought I drove a lot with over 126K in 5.5 years on my '02 WRX wagon.
 
It's actually more than that
I'm not counting times the Rex was in the shop and I had a rental or the times lately I've driven my wifes car.
The company will not provide a company car for me. I think they get a better deduction by paying my mileage? Well either way I'm worn out from doing it.
My license takes a risk every time I'm out on the highways.
Thankfully nothing has broken lately or I might have missed my vacation. My boss can't even reach me
My Rex is pretty rough right now, last legs really. I have a suc... I mean a buyer for it! He basically wants it for a street or race project or something like that so he's going to tear it all down anyway and it's a cool $1.5K for me. He knows the car well he works at a company I have to go to. His dad owns a customizing shop or something. No idea why he wants an old Rex he says it's a really cool car looks wise either way it's still $1,500 to me. I even have a $500 non-refundable deposit.
#125 of 146
mazda/focus vs subie by deskman
Dec 23, 2007 (8:03 am)
Reply
mazda= ford junk unless it has a rotary then it is quality
 
subie= quality
#126 of 146
Re: mazda/focus vs subie [deskman] by 5port
Dec 24, 2007 (5:43 am)
Reply

Replying to: deskman (Dec 23, 2007 8:03 am)

Interesting point Deskman makes. I wonder if the block in the MS3 2.3L can be traced back to the 2.3 ford block in the 80's Thunderbird Turbo coupe/ Mustang SVO?
 
 5port
    08 Speed3
#127 of 146
Re: mazda/focus vs subie [deskman] by networkguy
Dec 24, 2007 (9:09 am)
Reply

Replying to: deskman (Dec 23, 2007 8:03 am)

mazda= ford junk unless it has a rotary then it is quality
 
So, you're talking about the Mazda 2.3 DISI (inline 4) that is on Wards 10 Best Engines list for 2006-2007. Didn't think that was a rotary...
#128 of 146
Re: mazda/focus vs subie [networkguy] by roadburner
Dec 24, 2007 (9:48 am)
Reply

Replying to: networkguy (Dec 24, 2007 9:09 am)

So, you're talking about the Mazda 2.3 DISI (inline 4) that is on Wards 10 Best Engines list for 2006-2007. Didn't think that was a rotary...
 
Excellent point!
FWIW, "deskman" claims to be a car salesman and is usually found in the "Smart Shoppers" forums bragging about how much money he makes off his customers. Methinks that he's just playing the troll in a different sandbox...
#129 of 146
Re: mazda/focus vs subie [deskman] by aviboy97
Dec 26, 2007 (9:57 am)
Reply

Replying to: deskman (Dec 23, 2007 8:03 am)

mazda= ford junk unless it has a rotary then it is quality
  
subie= quality

 
I really do not know what to say to that. Subi's are great cars, but, Mazda's are not Fords. Since this thread talks about the Mazdaspeed3 in particular, Ford does not build, nor did it design the Mazdaspeed3. It is built in Japan, with Japanese engineering.
 
Ignorant comments like that help no one.
#130 of 146
Re: mazda/focus vs subie [5port] by aviboy97
Dec 26, 2007 (10:02 am)
Reply

Replying to: 5port (Dec 24, 2007 5:43 am)

I wonder if the block in the MS3 2.3L can be traced back to the 2.3 ford block in the 80's Thunderbird Turbo coupe/ Mustang SVO?
 
Nothing to do with the 80's Fords.
 
The MZR engine design was done by Mazda and first seen in the 2003 Mazda6. This engine design is used in the Mazda3, Mazda6, Tribute, Mazdaspeed6+3, CX-7. Ford uses the MZR design in their Focus / Fusion / Milan, Ranger, and Escape. Ford abandoned the ZTech design for the more powerful, fuel efficient design of the MZR by Mazda.
 
Mazda has taken this design even further by adding direct injection (fuel delivery system marked at 1800psi), turbo charger (built by Hitachi-Warner.) and inter cooled. The block has forged connection rods, cam shafts, and is built of aluminum. This is hardly the engine Ford used in the turbo charged Mustang of the 80's. In fact, they are not even related.
#131 of 146
Re: mazda/focus vs subie [aviboy97] by SubyTrojan
Dec 26, 2007 (10:05 am)
Reply

Replying to: aviboy97 (Dec 26, 2007 9:57 am)

aviboy97, the Mazda Mazda3, European (read: good) Ford Focus, and Volvo S40 all share the same platform.
#132 of 146
Re: mazda/focus vs subie [SubyTrojan] by aviboy97
Dec 26, 2007 (10:11 am)
Reply

Replying to: SubyTrojan (Dec 26, 2007 10:05 am)

Yes, share the same platform, however, how much does a platform actually have to do with the vehicle? Noting really. What matters is what is built on that platform..drivtrain, suspension, steering system, weight balance.....all of these things come into play. A shared platform really means nothing. It is just a starting point of building a vehicle. Ford shares these platforms to save development time and money. Quite brilliant really.
 
A shared platform does not mean they are one in the same.
 
Come to think of it, look how different the Impreza and Legacy are. They are currently built on the same platform, by the same manufacturer! Mazda3 / S40 / Focus really don't have much in common, at all.
#133 of 146
Re: mazda/focus vs subie [aviboy97] by SubyTrojan
Dec 27, 2007 (9:37 am)
Reply

Replying to: aviboy97 (Dec 26, 2007 10:11 am)

The new Impreza/Forester platform is not the same as the Legacy/Outback's. It's a shortened version of it. Please note the rear double wishbone suspension is actually derived from the Tribeca's design and not the Legacy/Outback.
 
I'm guessing there is probably more in common with the Mazda3/Focus/S40 than you think.

Messages Page 14 of 16
1
...
10
11
12
13
14
15
16
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement