- #5 of 45
-
Re: 2007 Camry back seat removal??? [jimfed1]
by stlpike07
-
Aug 05, 2007 (9:39 am)
-
|
|
Replying to: jimfed1 (Aug 04, 2007 2:48 pm)
I'm glad I was able to help you. It worked in my old car so I figure it would be the same with the new one. Most cars have the special "screws" for the back seats. Anyway, take care.
|
- #6 of 45
-
Re: 2007 Camry back seat removal??? [stlpike07]
by jimfed1
-
Aug 05, 2007 (12:32 pm)
-
|
|
Replying to: stlpike07 (Aug 05, 2007 9:39 am)
Any suggestions how to get the seat back of the back seat off ?????
|
- #7 of 45
-
Re: 2007 Camry back seat removal??? [jimfed1]
by stlpike07
-
Aug 05, 2007 (1:59 pm)
-
|
|
Replying to: jimfed1 (Aug 05, 2007 12:32 pm)
I assume you mean the part of the seat your back sits against.....If so, I believe there is actually some sort of assembly you would have to dismantle in order to take that part off. Because when you fold it down you can lift up part of the carpet to see the assembly holding the seat in place........so I have no idea there....not as easy at the seat bottom.
Are you putting slip covers on or completely new "original" fabric/cover?
|
- #8 of 45
-
Re: 2007 Camry back seat removal??? [stlpike07]
by jimfed1
-
Aug 05, 2007 (2:22 pm)
-
|
|
Replying to: stlpike07 (Aug 05, 2007 1:59 pm)
I am replacing with OEM factory seat covers, so I have to remove the original to put these on. So far everything is good, as the front ones were very time consuming, but look much better now. the seat part of the back seat looks great, but just have not messed much with the seat back of the back seat, as it is in pretty rough condition also. Whoever owned this car before me must have lived in it, as it is a 07 with 35k miles on it. Outside is cherry but inside has the lived in look. Found new covers on Ebay taken off a new SE fr a leather install. Much cheaper than buying through Toyota.
|
- #9 of 45
-
seat comfort, 2007 Camry
by bob1111
-
Dec 08, 2007 (11:03 am)
-
|
I have a 2007 Camry Hybrid with leather seats. The seat bottom of the driver's seat is very uncomfortable due a rod-like feeling that runs down the center of the seat bottom, from the front to the back, exactly following an upholstery seam. I suspect this is caused either by the upholstery seam or something under it, inside the seat.
Has anyone else noticed this same problem?
|
- #10 of 45
-
missing part
by camrymania
-
Apr 29, 2008 (3:48 am)
-
|
|
hi guys. i bought a camry 2007, and there is something i wanna ask you guys about... there is something missing under the right front seat, and i can only see the wires, but the "devise" is missing. can anyone tell me what was it. thanx alot.
|
- #11 of 45
-
Re: missing part [camrymania]
by kiawah
-
Apr 29, 2008 (5:00 pm)
-
|
|
Replying to: camrymania (Apr 29, 2008 3:48 am)
You don't say what model you have. My LE 4 cylinder has no device under the front right seat. There is a set of wires that comes up from the floor and plugs into the seat, but other than that....no device.
|
- #12 of 45
-
Re: missing part [kiawah]
by rsantan1
-
May 05, 2008 (1:39 pm)
-
|
|
Replying to: kiawah (Apr 29, 2008 5:00 pm)
That is where the amplifier is located if your Camry came with JBL sound.
|
- #13 of 45
-
Re: seat comfort, 2007 Camry [bob1111]
by freda5
-
May 29, 2008 (3:08 pm)
-
|
|
Replying to: bob1111 (Dec 08, 2007 11:03 am)
I have cloth seats in my 2007 Camry and they are so uncomfortable. My daughter and I traveled to Florida (8 hour trip) last year and before we got there I was in so much pain. It felt like my tail bone was broken. After 2 - 3 days I was better. When we started home, I sat on a pillow.
There is a metal thing sticking up in the middle of my seat.
|
- #14 of 45
-
Re: seat comfort, 2007 Camry [freda5]
by kiawah
-
May 29, 2008 (6:40 pm)
-
|
|
Replying to: freda5 (May 29, 2008 3:08 pm)
Hmmm, don't have that problem, and have almost 30K miles and have taken a number of long trips. Is the metal that you feel on the bottom seat, or the back rest? I just went out and refelt the seat, pushing all over trying to feel something hard and metal, and can't find anywhere that it hard like you reference.
Go to the dealership, and show them where the metal hardness is. You can compare against other cars at the dealership as well.
|
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Sedans 
