Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Wagons Subaru Crew Subaru Forester Towing with a Forester
97 messages, Last post on Apr 21, 2008 at 6:24 AM
You are in the Subaru Forester Forum. Your Host is kcram
|
|
|---|---|
|
Replying to: rsholland (Aug 01, 2007 6:47 pm) I wonder what the new wiring and trailer brake controller will cost?
|
|
|
|
|
Replying to: kayakingsue (Aug 01, 2007 7:27 pm) Is there going to be any problem with the rest of my Forester's electrical systems if I retro-fit a 7-prong plug and brake controller into the car?
|
|
|
Replying to: kayakingsue (Aug 01, 2007 7:29 pm) Man they sold you a bill of goods. I got a retrofitted Class II Hidden Hitch for less then the Subaru Class I hitch. And NO, if it is done right, you will have NO problem with the electrical. They will run a wire down from the battery then put a converter (little black box) in line and connect up with the four pin under the tire and run it all back to a preset 7 pin box connector next to your hitch. No problem, but around 150 bucks. And let a hitch installer do it. They generally will say it is very easy on a Subaru as it is already set up for a four pin and that makes it easier for them. Show them up front how it is set up and that might lower the estimate since it is easier for them. |
|
|
|
|
Replying to: kavoom (Aug 02, 2007 3:29 am) |
|
|
Replying to: kavoom (Aug 02, 2007 3:29 am) Man they sold you a bill of goods. I got a retrofitted Class II Hidden Hitch for less then the Subaru Class I hitch. And NO, if it is done right, you will have NO problem with the electrical. They will run a wire down from the battery then put a converter (little black box) in line and connect up with the four pin under the tire and run it all back to a preset 7 pin box connector next to your hitch. No problem, but around 150 bucks. And let a hitch installer do it. They generally will say it is very easy on a Subaru as it is already set up for a four pin and that makes it easier for them. This is not entirely true. What has to happen is that a brake controller needs to be installed, not just a 7pin connector. The best brake controllers to get are the Teckonisha (sp?) and run about $120-150 depending on where you buy it. Then you need to connect it up yourself or have a trailer place wire it up. Since the Subarus IIRC are not pre-wired for the brake controller you'll need to run a power wire from the battery to the controller, then the controller connects up to your brake light switch and a few other connectors, then runs back to the 7-pin connector in the rear. What this does is provide 12 volt power and amperage to actually engage your brakes on the trailer. Simply putting a 4 to 7 pin adapter will not yield any braking action on the trailer. Cost runs about $200-300 to get the install done, so you are looking at roughly about $500 overall to get a good controller and have it installed. Don't get a cheap controller that only works off your brake lights as they will kill your brakes on the trailer as they are not inertially controlled as the more expensive ones are. The inertially controlled ones provide braking based on how quickly you are braking rather than on how long your foot is on the brake pedal. -mike
|
|
|
|
|
Replying to: paisan (Aug 02, 2007 6:11 pm) |
|
|
Replying to: paisan (Aug 02, 2007 6:11 pm) That is the reason for having a 7 pin hitch. It's the brakes... And that is failing of Subaru. Why install electrical for towing that isn't up to the brakes that you (as a manufacturer) require for anything over 1,000 lbs. All that does is tempt people to not put them on...
|
|
|
Replying to: kavoom (Aug 03, 2007 2:56 am) You have to get someone to install the brake controller anyway, they don't charge a lot more to get the 7pin connector also wired in. -mike |
|
|
Out of curiosity, what is the size of the opening on the Forester's trailer hitch? I currently have a hitch-mounted bike rack for my Liberty which I think requires a 2" hitch mount. Is it 2 inches? Thanks
|
|
You are here:
Forums
Wagons Subaru Crew Subaru Forester Towing with a Forester
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Subaru Forester
Browse by Board
Browse by Topic
Today's Chats
