You are here:
Forums
Sedans
Chrysler 300M
Chrysler 300M Electrical/Lighting

43 messages, Last post on Sep 07, 2009 at 11:28 AM
You are in the Chrysler 300M Forum. Your Hosts are pat & karens
|
|
|---|---|
|
I have a 1999 Chrysler 300M that I recently purchased, used. The car has been running fine, and while it needs a little work in all aspects, its been great. Today I was driving around and went to pick up my friend. I parked outside with my other friend in the passenger seat, and we were in there a good 15 mins with the radio and heat on. When I went to start up the car and leave, I noticed that when I turned on my lights fully, and then turned on my fog lights, the hazard (or left/right turn indicator on the main console) was on. It wasnt a bright green like when the hazards are on or when I am turning, but a very dim green. I then went to look outside, and my fog lights would not come on. Whenever I turned them on, the yellow lights on the front sides of the car would brighten up. I then went to try out my turn signals, and they were blinking as if on a crack rush. They would blink at very high speeds, but go back to normal as soon as I shut the headlights/foglights off. I am not very vehicle savvy but I imagine this is maybe a fuse. But I wanted to know if anyone on here had an idea of what might be wrong, or if any of you have experienced this. And if so, how I can fix it. Thanks! |
|
| First my fans went out that cool the engine, both of them, so my car overheats if I'm not constantly driving to allow air to flow through the engine. The fuses were blown so I replaced them and they blew right back that day. Also my break lights don't work anymore and the fuses arent even blown and the bulbs have been changed, still not working. Anybody have any suggestions? | |
| im having a problem with display light for a/c and heater display, temp and functions will work but you dont know where you are at.im sure by putting it on auto this will suffice but its a crap shoot. repeat all functions work,just the display light,and thats when it wants to and no rhyme or reason to that . totally annoying. thanks for any advice | |
|
On the way home fuse 17 blew. Found it replaced drove for 2 days, blew again, replaced blew next morning and everytime driven after that. This circuit contains the AC head controller, ABS Controller, Day/Night Mirror, and Transmission Sensing Switch. We've put a meter on it and found out that it blows right after you accelerating from a dead stop.. When you let off the gas, bam!! it blows. We disconnected the AC controller and turned off the day/night mirror but it still blows. Anyone have any thoughts ideas or same problem? |
|
|
Hi people, I´m living some 100 km above the arctic circle and for some years I´ve been driving a -99 300M that runs smoothly. The other day the headlight (drivers side) went out. As I understand it´s a bit tricky to change bulbs, so before starting I would really appreciate some advice from any of you hardened Chrysler owners that knows how it should be done in the best way. Thanks in advance. |
|
|
Replying to: coldknight300 (Aug 03, 2007 8:41 pm) I am having the exact same experience. What answers did you get to resolve it. I have been checking the wiring harness under the front passenger wheel. Does anyone know where I can get this part on the cheap? Please Help |
|
|
I'm having an issue regarding my Engine and Electrical warning lights. I live in New York and a hurricane just by-passed us. Since then... The engine and electric light have been on as soon as the engine is started. Is this a major problem or just a case of wet wires? Has anyone else ran into anything similar? |
|
|
Hello, I recently purchased a 1999 300M and the overhead interior lights seem to be burnt out or might be an electrical problem. I can't seem to get the piece off to check the bulbs. I only see one screw and I took that out and the back seems to pull off a little but the front will not budge and I didn't want to break it. Please help me understand how to take this piece off so I can check the bulbs. It's the overhead lights pannel where it shows the temp outside, MPG, and other things. Anyone??? Please help... |
|
|
Hello, I have a 2003 300m special...and am having issues where all of the lights work sometimes and not others. This makes it difficult to see my rpm and speed. everything else seems ok. any ideas? Thanks! |
|
You are here:
Forums
Sedans
Chrysler 300M
Chrysler 300M Electrical/Lighting
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2004 Chrysler 300M



Browse by Board
Browse by Topic
Today's Chats