Chrysler 300 Outside temperature Sensor

5 messages, Last post on Sep 05, 2007 at 9:00 AM

You are in the Chrysler 300/300C/300C SRT-8 Forum. Your Hosts are pat & karens

What is this discussion about? Chrysler 300, Chrysler 300C SRT-8, Sedan

#4 of 5 Re: Outside temperature Sensor [lacade] by smithed Jul 24, 2007 (7:48 pm)
Replying to: lacade (Jul 20, 2007 7:03 am) Mine always seems just a little high,too.
#5 of 5 Did you know you can adjust the temp indicator? by goofytiml Sep 05, 2007 (9:00 am)
Enter the diagnostic menus (hold the Menu and Music buttons simultaneously for 7-10 sec) then page through the EVIC screens until you get to the raw temperature display. Press the > button and you can decrease the indicated reading by increments of 5 degrees. One day I found the indicated temperature reading way, way off. Up until that point I had thought it to be pretty accurate. I was planning to take the car to the dealer to find out what was wrong with the sensor. But then I found this little trick, and I got it back to reading normally all by myself. It took a couple more adjustments over the next couple of days (wife's car, which I don't drive that often), but now it's back to reading normally again. Try it... you might like it.