Chevy Silverado and GMC Sierra Stalling Problem

73 messages, Last post on Oct 29, 2009 at 8:44 PM

You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram

What is this discussion about? GMC Sierra 1500, Truck

Outline

Messages Page 9 of 9: 1; ...; 3; 4; 5; 6; 7; 8; 9; Prev; Next; Last

#72 of 73 Re: 03 GMC SIERRA 4.8 STALLING [ndmech14] by ndmech14 Oct 29, 2009 (8:31 am)
Replying to: ndmech14 (Oct 29, 2009 8:25 am) Should I spray the brake cleaner around the intake manifold or by the coupler before the throttle body. Where does the leak happen in these instances? I assume I could just by some RTV sealant and reinstall the manifold with this at the seams to correct the problem? Replies to this message: obyone (Oct 29, 2009 8:44 pm)
#73 of 73 Re: 03 GMC SIERRA 4.8 STALLING [ndmech14] by obyone Oct 29, 2009 (8:44 pm)
Replying to: ndmech14 (Oct 29, 2009 8:31 am) The IAC needs to be removed and cleaned with an electric parts cleaner or better yet replaced. If the truck dies while moving that would be associated with the Throttle Position Sensor.

#72 of 73: Re: 03 GMC SIERRA 4.8 STALLING [ndmech14] by ndmech14; Oct 29, 2009 (8:31 am)

Replying to: ndmech14 (Oct 29, 2009 8:25 am)

Should I spray the brake cleaner around the intake manifold or by the coupler before the throttle body. Where does the leak happen in these instances? I assume I could just by some RTV sealant and reinstall the manifold with this at the seams to correct the problem?

obyone (Oct 29, 2009 8:44 pm)

#73 of 73: Re: 03 GMC SIERRA 4.8 STALLING [ndmech14] by obyone; Oct 29, 2009 (8:44 pm)

Replying to: ndmech14 (Oct 29, 2009 8:31 am)

The IAC needs to be removed and cleaned with an electric parts cleaner or better yet replaced. If the truck dies while moving that would be associated with the Throttle Position Sensor.