Sign In Join 



Toyota RAV4 Cruise Control Problems

285 messages,  Last post on Jun 14, 2009 at 8:14 AM

You are in the Toyota RAV4 Forum. Your Hosts are steve_ & tidester

What is this discussion about? Toyota RAV4, SUV


Messages Page 2 of 29
1
2
3
4
5
6
7
...
29
Prev
Next
Last
Go To Msg #
Search This Discussion

#11 of 285
ces1938 [charles] by ces1938
Jul 27, 2007 (3:02 pm)
Reply
Oh gezzz Mike the dealer does not have a clue of what the problem is do they.... well at least maybe this will fix it for you, sure hope so but let me know how it turns out will you, maybe it will give me some info to go to my dealer with or maybe a different dealer if necessary...I still think it is a design problem, that darn computer control for the cruse control just is not as flexable as the old ones were..but we will see...Boy I sure appreciate you keeping me informed Mike, I was ready to have a after market one installed...may yet... talk to you later thanks again, Charles
#12 of 285
Re: ces1938 [ces1938] by mlmcgahee
Jul 29, 2007 (4:24 am)
Reply

Replying to: ces1938 (Jul 27, 2007 3:02 pm)

Here is a link to a video of my RAV4 problem...
Charles is this what yours is doing?
Mike
 
http://www.carspace.com/videos/play!id=.5b3d3866
#13 of 285
Rav 4 Problem / ces1938 by ces1938
Jul 29, 2007 (6:44 am)
Reply
 
Hi Mike that is just like the way mine does,I finally was able to open your web site.... were they able to fix yours???
Thanks for posting that, Charles
#14 of 285
Re: Rav 4 Problem / ces1938 [ces1938] by mlmcgahee
Jul 29, 2007 (3:09 pm)
Reply

Replying to: ces1938 (Jul 29, 2007 6:44 am)

They still have it in the shop. I am in a loaner car until they call me later this week. Maybe this will work, but everything that I've read on the Internet points to a computer related problem that deals with the drive-by-wire technology Toyota used in the 2006-2007 Camry and RAV4 with the 4 cyl engine. The computer directly controls the cruse control and throttle. I'll keep you posted....
Mike
#15 of 285
ces1938, Rav 4 problems by ces1938
Jul 29, 2007 (3:21 pm)
Reply
Yea,Mike,you have found the same info that I have, you know I retired from the Boeing company and they use the "fly by wire" system on their aircraft and it works quite well, so I don't know why they have made such a mess outta this on the car, but if you understand computers than it is not so hard to understand.. computers are not flexible enough for the cruse control, to them it is either right on or not and that just does not work for a cruse control and I can not even imagine a engineer not realizing, hell I did and so do you now, well let me know how it turns out, I am thinking about replacing it with a after market cruse but that ticks me off big time.... that stinking thing has cost them a customer that buys a new car all most every year, either for my wife or me.... thanks again... Charles
#16 of 285
Re: cruse control on 2006 Rav 4 [mlmcgahee] by mackabee
Aug 01, 2007 (7:23 pm)
Reply

Replying to: mlmcgahee (Jul 23, 2007 5:44 pm)

Looks like it's "gear hunting". This is normal. When going uphill take the overdrive off. The little button on the left side of your gear shifter. The indicator O/D OFF will illuminate yellow on your instrument panel. I just saw your video on carspace and told you to take the car to the dealer immediately but after reading your post I knew exactly what you were talking about.
 
Mackabee
  
P.S. I've been selling Toyotas for the past 10 years and have owned 3 Camrys, 2 Corollas, 1 MR2, and the original Toyota Van LE which used to do what your RAV is doing until I was told about the overdrive switch. Try it and let us know what happens.
#17 of 285
Re: ces1938, Rav 4 problems [ces1938] by mackabee
Aug 01, 2007 (7:24 pm)
Reply

Replying to: ces1938 (Jul 29, 2007 3:21 pm)

Charles, see my post above.
 
 Mackabee
#18 of 285
Re: cruse control on 2006 Rav 4 [mackabee] by mlmcgahee
Aug 02, 2007 (2:35 am)
Reply

Replying to: mackabee (Aug 01, 2007 7:23 pm)

I have the 2007 RAV4 base model with the 4 cyl engine. It has a gated shifter and no overdrive button. You just move the shifter to the left to take it out of overdrive. I have tried shifting it out of overdrive before going up an incline, but it has no effect on the problem. Thanks for your input mackabee.
Mike
#19 of 285
ces1938 Rav 4 cruse problems by ces1938
Aug 02, 2007 (10:17 am)
Reply
To mackabee, I have the 4 cyl basic Rav 4 and it has the gated shifter too, and also it makes no difference the stupid thing "hunts gears" like you say, they only way the transmission will work right is if I do not use the damn cruse.... I have been buying cars with cruse control since 1970 and NONE of them worked like this, including a 1996 Camry, a 2002 Honda, a 2005 Camry wtih five speed tranny... this thing is defective either by engeering or by defect in the cruse or transmission... it is nuts, a lot of the time I just have to tap the brake so the cruse will kick off before the damn thing blows up the engine.... thank for the advice tho... Charles
#20 of 285
Re: ces1938 Rav 4 cruse problems [ces1938] by mlmcgahee
Aug 02, 2007 (10:33 am)
Reply

Replying to: ces1938 (Aug 02, 2007 10:17 am)

Update:
The loaner car they gave me is a Brand New 2007 Corolla LE 4 cyl. automatic. The cruse control works perfect in it... No problems what so ever. There is even more power in the shifting of the gears from a dead stop. My RAV4 tends to have some lag.
Mike

Messages Page 2 of 29
1
2
3
4
5
6
7
...
29
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement