Last post on Nov 11, 2013 at 9:28 PM
You are in the Chrysler Pacifica
What is this discussion about?
Chrysler Pacifica, Wagon
#6 of 16 I can not find harnesses...
Aug 21, 2007 (10:02 pm)
I got a new overhead monitor for my pacifica touring 2007 but I can not find harnesses to connect it to the dvd changer in-dash.
Also I searched the web to find template to cut the roof of the car, but also I did not find anything...
#7 of 16 Re: I did this with our 2007 model - It can be done! [jamesutz]
Aug 21, 2007 (10:12 pm)
In my new pacifica touring 2007 I take off the right side windshield piller and I did not find the DVD player's wiring harness (no 12 pin connector (C204)) !!!
Only 2 cables exist : 1 thin and the other is thick.
#8 of 16 Re: I did this with our 2007 model - It can be done! [pierremicha]
Aug 22, 2007 (9:41 pm)
Did your Pacifica come pre-equipped with the 6-disc DVD changer?
Just to be crystal clear, by "the right side pillar", I mean the one on the passenger side that is located between the windshield and the passenger side window.
#9 of 16 Re: I did this with our 2007 model - It can be done! [jamesutz]
Aug 23, 2007 (4:49 am)
- Yes, it comes pre-equipped with the 6-disc DVD changer...
- I re-checked the right side pillar and no harnesses or connectors found , only 2 cables: the thick one is for antenna...
Oct 21, 2007 (11:32 pm)
my car is come with 6 DISK DVD CHANGER, but not harness or connector found, I seardched Ebay, found the MR CD1. ask for $250 for just a cable .......
any idea? where we can found this harness
#11 of 16 Re: I did this with our 2007 model - It can be done! [jamesutz]
Nov 27, 2007 (3:07 pm)
hey, my name is jay. i my wife has a 04 pacifica that sounds to have the same set up as yours. It has the 6 disk dvd -cd changer but no monitor. I have not been able to find any plug to go from a aftermarket monitor to the factor dvd......do you have any idea if the manual that you have is for that year as well .....
#12 of 16 Re: I did this with our 2007 model - It can be done! [pierremicha]
Nov 30, 2007 (3:55 pm)
I have a 04 with the 6 disk dvd/cd changer also....i took the left pillar off and saw the same wires and skinny one and a thick one....i could not trace them too far because they went farther back then i could feal them.....have you found anything out with your to get it to work????need help bad
Aug 21, 2009 (5:54 am)
I have a 2005 Pacifica with a 6 disc CD Changer factory unit. I tried connecting the aftermarket monitors that go on the headrests but could not get any video to those monitors. I installed a DVD and heard it fine on the radio speakers but nothing was playing on the monitors. I have seen alot of discussions on here and it sounds like all I need is a wiring harness, is that true?
#15 of 16 Re: I did this with our 2007 model - It can be done! [helpdvdquest1]
Mar 17, 2011 (1:47 pm)
I am hoping someone can help.
We have a 2007 Pacifica Touring. Has cd deck and separate dvd player. We have had an after market monitor installed (power acoustik). Currently video works, sound works through car speakers (not RF). Wireless headphones will pick up the sound, but driver can still hear the sound even with headphones activated.
I am trying to get this vehicle to operate dvd system separate from cd/radio using headphones. Can get system with Pacifica remote to show headphone mode on control panel, but can still hear sound in car. Also, when I change mode after putting in headphone mode to go to radio for example, power is cut from DVD player.
I thought this vehicle was equipped for the rear to watch movie and use headphones while driver could listen to radio.
Can anyone help???
thank you in advance!