You are here: Forums SUVs Land Rover 88 Range Rover

88 Range Rover

12 messages,  Last post on Sep 25, 2007 at 3:44 PM

You are in the Land Rover Forum. Your Hosts are steve_ & tidester

What is this discussion about? Land Rover Range Rover, Engine, SUV

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

#8 of 12 Re: ? [british_rover] by dandrews1 Jun 12, 2007 (6:09 am)
Replying to: british_rover (Jun 12, 2007 5:59 am) Thanks! I wasn't sure about the years the RR had the EAS (70's?) but thought it may be good info to relay that EAS could generically be a problem with them.   I'm actually dreading whats going to happen long-term with my 2006 LR3 and it's EAS...
#9 of 12 Re: 88 Range Rover [bmessmike] by kumasi Jun 13, 2007 (8:17 pm)
Replying to: bmessmike (Jun 11, 2007 3:23 pm) Greetings 88 Range Rover, This is going to be hard for you, but take a deep breath. Remember it's a use car and they all come to us sick. I just bought my today and I knew upon purchasing it I will be putting some money into it to get the way I want it. You no doubt will have to go deep into your pocket, but check it pallie, it's a range rover! You are one the few, the proud to own the greatest off-road vehicle to ever hit the mountains. So think of it as a great investment. I know that's how I'm looking at mine. It will go to the grave with me. Yeh, range rovers ROCKS Peace always, and forgive my loud mouth?
#10 of 12 Re: 88 Range Rover [bmessmike] by pbrittingham Sep 25, 2007 (3:35 pm)
Replying to: bmessmike (Jun 11, 2007 3:23 pm) be glad that you own a 1988 rr with 3.9 engine!! To me the best!!! a nice feature on your truck is that you can repalce oil pump parts a bit less expensive than having to change out complete front cover on newer models 4.0 4.2 and 4.6!! go to rovers north or atlantic british on internet and they can help you with the parts!! if you have exterior oil pump in lieu of oil pump inside front cover!!the parts can wear and are easy to change out!!! Make sure before you do this check oil pressure or have a shop do it for ya!!!
#11 of 12 1995 discovery 1 (3.9 engine) starter ground wire location ???? by pbrittingham Sep 25, 2007 (3:44 pm)
I recently rebuilt my 3.9 engine and for some stupid reason at install i can not remember where the ground from under passenger side foot well attaches so to ground starter!! I have atttached this ground wire to bolt which mounts starter to block(No Luck) I have also attached this ground wire to bell housing bolt and still no luck. The engine turns over, i have fire to coil,and i have fire to number 1 spark plug!unfortunatly the engine will not crank and worst of all the neg ground on battery is smoking a bit and gets hot so i know the ground is wrong and shortening out!!! i know for fact all other grounds and wire connections are correct!! these were clearly marked at change out!!this is the only one where i need to connect!!!Thanks my wife is stranded!!!! sincerly,patrick

Messages Page 2 of 2 1 2 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums SUVs Land Rover 88 Range Rover