Sign In Join 



Chevrolet Avalanche Noise and Vibration

21 messages,  Last post on Dec 03, 2009 at 9:43 AM

You are in the Chevrolet Avalanche Forum. Your Host is kcram

What is this discussion about? Chevrolet Avalanche, Truck


Messages Page 3 of 3
1
2
3
Prev
Next
Last
Go To Msg #
Search This Discussion

#16 of 21
Re: Avalanche Drivetrain Rattle [krashfreeway] by erickpl
Feb 27, 2009 (9:46 am)
Reply

Replying to: krashfreeway (Feb 26, 2009 2:48 pm)

Why would it rule out the catalytic? My Jeep's catalytic sounds like a can of marbles when driving, but quiet when idling.
 
Take a rubber mallet to the catalytic. If it rattles, there's your problem.
 
You may also want to check the various fittings/connections to see if anything is loose. I've had rattles that I was SURE are suspension, but it was just a d-shackle swinging when I applied brakes/gas.
 
Have you had any maintenance or mods done recently?
 
-Paul
#17 of 21
Wheel Bearing? by jiml3222
Mar 16, 2009 (12:42 pm)
Reply

Replying to: krashfreeway (Feb 26, 2009 2:48 pm)

I had a similar issue starting at 106K miles. Sound was heard under 25 mph and was intermittantly more pronounces as I made slow-speed turns. I suspected that it might be a front brake part dragging. I had the brakes inspected. Brakes were fine, but not the wheel bearing on the drivers side. That cost $420 to repair including AAA discount. BTW - any brake jobs I suggest replacing with ceramic pads rather than bi-metalic pads. They are worth their weight in new rotors!
#18 of 21
Re: Wheel Bearing? [jiml3222] by erickpl
Mar 17, 2009 (5:07 am)
Reply

Replying to: jiml3222 (Mar 16, 2009 12:42 pm)

Durastop pads and rotors. Incredible performance - and from GM.
 
-Paul
#19 of 21
high speed vibration by boggsy1
Sep 13, 2009 (4:00 pm)
Reply
I have an '02 avalanche. It just started moderately vibrating between 63 and 73 miles per hour. Slower is ok and faster is ok. Bought new tires in April and haven't had any problems until now. Jacked it up and nothing seems loose, tires have no bulges or defects on the outside. Alignment? Help!
#20 of 21
Re: high speed vibration [boggsy1] by erickpl
Sep 18, 2009 (10:53 am)
Reply

Replying to: boggsy1 (Sep 13, 2009 4:00 pm)

Did you get an alignment? If you lifted it, the front wheel camber will be off and will need an alignment or the outer edges of the tires will cup and you'll get vibes.
 
-Paul
#21 of 21
Wierd Avalanche Noise by roy40
Dec 03, 2009 (9:43 am)
Reply
If I apply the brakes and stop with the wheels turned left or right (as at a 'T' intersection) there is a wierd noise like a brake dragging or a locked-up differential. It's wierd because it doesn't make the noise if the wheelsremain straight when stopped. I can then turn them and there's no noise. What gives?

Messages Page 3 of 3
1
2
3
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement