57 messages,
Last post on Jan 15, 2013 at 1:17 AM
You are in the
Hyundai Accent Forum.
What is this discussion about?
Hyundai Accent, Engine, Hatchback
Go to NHTSA to file a safety complaint.
Or call Monday-Friday (8 am to 8 pm ET) (888) 327-4236 TTY: (800)424-9153
#48 of 57 hyundai sonata ,2002
by justmeblues
Jun 08, 2010 (4:32 pm)
where is the plug for the computer diagnostic too?
thanks
#50 of 57 Cracked Exhaust Manifold
by dustyk
Aug 06, 2010 (12:22 pm)
I have a 2001 Accent with the 1.6L motor. We've been getting a check engine lamp illumination for some time and there has obviously been an exhaust leak for the last year or so. It sounded like the leak was coming from the behind the heat shield that covers the O2 sensor. In three seconds an auto repair technician quickly pointed out that the manifold is cracked in the area around the O2 sensor. Apparently he's seen this before.
Anybody else have this problem and if so, what did it cost to have it repaired?
Thanks,
Dusty
#51 of 57 2009 Hyundai accent quits running
by j_buchanan227
Nov 22, 2010 (6:03 am)
got my battery and everything else checked...everything is good....so why is my car dying?
#52 of 57 Re: 2009 Hyundai accent quits running [j_buchanan227]
by backy
Nov 22, 2010 (7:46 am)
Your car is under warranty. Your best bet is to get thee to a Hyundai dealer and have them hook it up to their diagnostic machine and check it out. But a dying car can be due to reasons other than the car, e.g. bad gas.
#53 of 57 Re: 2009 Hyundai accent quits running [backy]
by j_buchanan227
Nov 23, 2010 (9:37 am)
The dealer found nothing wrong. but thanks any way
#54 of 57 Re: 2009 Hyundai accent quits running [j_buchanan227]
by backy
Nov 23, 2010 (5:37 pm)
Try another dealer, since that dealer seems to be incompetent.
#55 of 57 '04 accent cylinder 1 misfire
by 04axxent
Nov 28, 2010 (9:05 am)
My car is is having a misfire in cylinder one when I get on the throttle to aggressively. At first I attempted to change the fuel filter and throughout the searching for it never found it. We chased the line from rail to tank and even pulled the pump. So we read the computer and the misfire problem and an O2 sensor problem. I change the O2 sensor and no change was made so I have tried a new TPS, but that didn't solve the problem. Now I am wondering where I should look. Does anyone have any suggestions?
#57 of 57 HELP NEEDED valve replacement advice 01 1.6dohc
by 01accentgs
Jan 15, 2013 (1:17 am)
i was driving and my timing belt broke in turn bending valve(s) in my #3 cylinder. any help would be greatly appreciated. videos are ideal