Ask the Car People.SM


Chevy S10 - GMC S15 and Sonoma Brake Problems

47 messages,  Last post on Apr 30, 2012 at 2:34 PM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum.

What is this discussion about? Chevrolet S-10, GMC S-15, GMC, Truck

Messages Page 6 of 6

#42 of 47 Re: bleeding brakes,whats a easy way? [chris112] by deathdif

Oct 08, 2011 (12:26 pm)

Replying to: chris112 (Nov 18, 2007 6:30 am)
air in the line somewhere. bleed your brakes and it should go away. if it doesn't then take a real close look at your brake lines. look for any signs of swelling or leaks.

#43 of 47 Re: bleeding brakes,whats a easy way? [deathdif] by deathdif

Oct 08, 2011 (12:29 pm)

Replying to: deathdif (Oct 08, 2011 12:26 pm)
wrong post, sorry. easiest way i found was get a piece of wood just long enough to hold the brake pedal down after you pump it. they do however make hand held devices that claim to do the bleeding system all from the caliper. i have never personally used them however so i couldn't tell you how good/bad they are.

#44 of 47 brake problem by bluebandit_s10

Oct 12, 2011 (1:39 pm)

im having a problem when i start to break...the first 15-20 mins of driving when i start to slow down it feels like its "jumpy" the steering wheel starts to shake i dont have trouble stopping but this was a concern to me after driving for a while it doesnt do it..i noticed i had y ac or heat on and when i turned it off it helped...another problem im having is that my enginge feels "heavy kinda" like when im stopped it wont even roll back on a hill like it usually does and it stops if im trying to move forward a little bit..if this doesnt make a whole lot of sense i can try and explain it better

#45 of 47 Re: brake problem [bluebandit_s10] by gonogo

Oct 13, 2011 (8:08 am)

Replying to: bluebandit_s10 (Oct 12, 2011 1:39 pm)
Sounds like dragging brakes, better get it checked before you burn them up.

#46 of 47 Chevy S-10 ABS sensor location(s) by shopdog97

Apr 30, 2012 (2:34 pm)

I have a friend who has a '99 S-10 2.2 engine 2WD / auto trans. He says his ABS light is always on now and wonders if it might be a sensor issue. Where would this/these sensors be located? He told me in church Sunday that he knows the ABS unit is working as he had to make a hard stop as someone cut him off the other day and he felt the brake pedal pulse as it does when the unit is working correctly. Any help you can give us on this would be greatly appreciated. Thanks and have a wonderful day!

Messages Page 6 of 6

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement