47 messages,
Last post on Apr 30, 2012 at 2:34 PM
You are in the
Chevrolet S-10 & GMC S15 Sonoma Forum.
What is this discussion about?
Chevrolet S-10, GMC S-15, GMC, Truck
#28 of 47 Re: ABS Pump [vanhagar]
by gonogo
Jan 15, 2010 (9:17 am)
google for aftermarket rebuilders, I know there are some.
#29 of 47 Re: Brake Problems [sdrawkcab]
by chrome35
Jan 28, 2010 (6:55 pm)
try bleeding the brakes
#30 of 47 Re: Brake Problems [gonogo]
by 29fordcoupe
Mar 14, 2010 (10:14 am)
Thought it was a great post.
#31 of 47 Re: Brake Problems [gonogo]
by 29fordcoupe
Mar 14, 2010 (10:13 am)
Thought it was a great post.
#32 of 47 2002 s-10 ABS problem
by dickaloo
Mar 30, 2010 (8:58 am)
as I slow down and am braking everything is OK until I get to about 5 mph then there is a vibration in the brake pedal and the truck pulls to the left. As I get close to stopping completely, it then stops and normal braking resumes. I pulled the ABS fuse and now it doesn't do it but I guess I don't have ABS now. I am guessing a sensor or the motor on the ABS...not really sure. Any Ideas out there? Bob
#33 of 47 Re: 2002 s-10 ABS problem [dickaloo]
by gonogo
Mar 30, 2010 (11:35 am)
There a TSB on it. Check your front wheel sensors for corrosion under the mounting bracket.
Basically remove the bracket sensor mount, remove corrosion, apply light coat of grease and reinstall.
#34 of 47 funny braking
by dickaloo
Apr 01, 2010 (10:16 am)
thanks I'll give that a try.
#35 of 47 Re: 2002 s-10 ABS problem [gonogo]
by sdickerson
Apr 21, 2010 (9:52 pm)
2000 S10 ABS PROBLEM HAVING THE SAME ISSUE AS [DICKALOO]ONLY AT 10 MILES AN HOUR AND NOT AS OFTEN IN THE RAIN?DID THIS LIGHT GREASE AND CLEANING SOLVE THE PROBLEM??????
May 07, 2010 (5:17 pm)
98 s-10 ext cab 2.2 2wdrive.I have a bad noise when you get down to 10mph or less put all new brakes on and still does trhis please help took to dealer spent 900.00 and they are clueless
#37 of 47 The Pedal will not go down
by geroname
Jun 15, 2010 (7:45 am)
98 Chevy s10
Some times when I go to hit the breaks. The Pedal will not go down, I have to jam it in or release and reapply to get them to work. It does not have a pattern when it does it. It has happened when im stopping in traffic or as I’m hitting the breaks and hit a bump or as I’m stopping at a light. Some time it feels like it pulls to the left and there is a vibration in the upper left of my dash you can hear it, sounds like where the booster is. AS it is happening I feel it grabbing a little and grinding but it just doesn’t want to go down like it is being held up. I have replaced both calipers already. Any thoughts?