You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Brake Issues

Chevy S10 - GMC S15 and Sonoma Brake Issues

25 messages,  Last post on Oct 07, 2009 at 9:42 AM

You are in the Chevrolet S-10 & GMC S15 Sonoma Forum. Your Host is kcram

What is this discussion about? Chevrolet S-10, GMC S-15, GMC, Truck

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

#16 of 25 Re: GMC Sonoma 92 greasing front wheel bearings [pilsner1] by gonogo Feb 27, 2009 (8:57 am)
Replying to: pilsner1 (Feb 26, 2009 2:53 pm) Check your brakes first, the wear indicator squeaks when touching and stops when brakes applied.
#17 of 25 how much brake line do i need by bowtiedad Aug 13, 2009 (2:02 pm)
i have a 98 s10 and am replaceing the brake line on the left side that goes from the front left wheel to the rear left wheel how much line do i need the parts house said they only have 60in lengths at the longest i only need about 95 in how do i splice the two together Replies to this message: gonogo (Aug 14, 2009 8:20 am) howfw (Aug 16, 2009 6:05 am) gonogo (Aug 16, 2009 1:55 pm)
#18 of 25 Re: how much brake line do i need [bowtiedad] by gonogo Aug 14, 2009 (8:20 am)
Replying to: bowtiedad (Aug 13, 2009 2:02 pm) Hard to read. If you need 95 inches, connect 2 60 inch with a union.
#19 of 25 Re: how much brake line do i need [bowtiedad] by howfw Aug 16, 2009 (6:05 am)
Replying to: bowtiedad (Aug 13, 2009 2:02 pm) Just did mine. I bought 25 foot roll. Got a double lip flare tool and used my old fittings. It looks like it takes about 17 feet. Bleed system. Afterwards I had very little pedal because of air in the ABS module. They recomend taking it to a shop. I followed a persons directions about driving at 15 mph and slaming on the brakes because I had a little stoping. This activates the ABS to move the air. Use parking lot not the road. Then a rebleed is required. Repeat as needed. Replies to this message: gonogo (Aug 16, 2009 1:55 pm)
#20 of 25 Re: how much brake line do i need [howfw] by gonogo Aug 16, 2009 (1:55 pm)
Replying to: howfw (Aug 16, 2009 6:05 am) Gravel will activate ABS real easy.
#21 of 25 abs brakes by jwebb64 Oct 06, 2009 (3:00 am)
changed lower ball joint and inner tie rod on my 2002 sonoma now at around 5 to 10 miles a hourwhen i hit my brakes sounds like pump kicks on how do i reset the abs any help would be nice thanks in advance Replies to this message: gonogo (Oct 06, 2009 7:52 am)
#22 of 25 Re: abs brakes [jwebb64] by gonogo Oct 06, 2009 (7:52 am)
Replying to: jwebb64 (Oct 06, 2009 3:00 am) You knocked your sensor out of wack, set the gap same as the other side.
#23 of 25 abs brakes by jwebb64 Oct 06, 2009 (9:52 am)
how do i go.about setting them the same. Replies to this message: gonogo (Oct 07, 2009 6:20 am) jwebb64 (Oct 07, 2009 9:42 am)
#24 of 25 Re: abs brakes [jwebb64] by gonogo Oct 07, 2009 (6:20 am)
Replying to: jwebb64 (Oct 06, 2009 9:52 am) It's mounted on a bracket, bend bracket. At one time there was a TSB on the sensor, rust under the bracket it threw out of line. Replies to this message: jwebb64 (Oct 07, 2009 9:42 am)
#25 of 25 Re: abs brakes [gonogo] by jwebb64 Oct 07, 2009 (9:42 am)
Replying to: gonogo (Oct 07, 2009 6:20 am) ok thanks for the help.

Messages Page 3 of 3 1 2 3 Prev Next Last

Go To Msg # Search This Discussion

You are here: Forums Pickups Chevrolet S-10 & GMC S15 Sonoma Chevy S10 - GMC S15 and Sonoma Brake Issues