Last post on Apr 29, 2013 at 12:49 PM
You are in the Mazda 626
What is this discussion about?
Mazda 626, Lights, Auto Repair, Electrical, Sedan
#28 of 31 Re: Frustrating Electrical Problem [randy0472]
Nov 23, 2012 (7:01 am)
FIRST THING TO TRY IS PUT A HEAVY GROUND WIRE FROM THE ENGINE BLOCK TO THE VEHICLE BODY, FIRST. IF THAT DOESN'T FIX IT, THEN START PUTTING GROUNDS FROM EVERY DEVICE TO THE BODY. GO TO THE HEADLITE GROUND WIRE AT THE HEADLITE AND GROUND IT TO THE BODY, ETC FOR EVERY DEVICE TILL U FIND THE RIGHT ONE.
SORRY ABOUT THE WORK INVOLVED, BUT THAT IS WHAT IT TAKES TO FIX IT.
A QUICKER ANSWER IS TO SELL IT OFF. THAT IS WHAT I DID WITH MINE.
#29 of 31 ignition/electrical problem
Apr 17, 2013 (9:03 am)
My 2000 Mazda 626 is pissing me off. After the starting once a wile issue, now it's parked because the ignition burns every time i tried to start the car. Flames and smoke from the left side end of the ignition cylinder,(the yellow plastic ring is melting ).
I don't know if there is a co-relation between the miss-tarting before and the burning i have now. What can be the problem and how to fix ?
#30 of 31 Re: car wont start [kevlar1106]
Apr 29, 2013 (1:34 am)
did you find the issue and what to do? my car has same issue, cranks over and over no go, i have fuel preasure, all fuses are fine, no spark, but all plugs are good, leads good, got 3 coil packs, all cheacked and work just not on car,
car worked fine then didnt anymore, it started then died out , would not restart til that evening, then died out again, within 15 20 seconds , then wil just not go again
#31 of 31 Re: car wont start [cobra96]
Apr 29, 2013 (12:49 pm)
Turned out it was my alternator. Inside the alternator there is a built in voltage regulator and it was an intermitent problem so after replacing the alternator It worked perfectly.