50 messages,
Last post on Jan 24, 2013 at 7:11 PM
You are in the
Mazda CX-9 Forum.
What is this discussion about?
Mazda CX-9, SUV
#41 of 50 New Key Fob for Remote Starter
by djsmiles
Feb 29, 2012 (10:06 pm)
Hello,
I live in Canada (Mississauga) and recently purchased a US 2007 Mazda cx9 that has a factory installed remote starter. However, I did not receive any FOB's and only received 1 smart card.
I have grown quite fond of my children, thus I did not want to sell them to pay the factory charge of purchasing a new card, programming and getting new remote fob's
Any ideas on how i can find them economically?
Looking for help
DJ
#43 of 50 heat wont turn on when I use auto start
by clopes1969
Jan 21, 2013 (10:51 am)
My wife has a 2008 Mazda CX9 with factory auto start. The auto start turns the car on, but not the heat. This is very inconvenient, I have called Mazda, but was told that they would have to see the car to check it out, which costs $$$$$. When I turn the car to ACC the radio remains on, but the heat turns off
#44 of 50 Re: heat wont turn on when I use auto start [clopes1969]
by paulvh
Jan 21, 2013 (11:55 am)
can you clarify more what happens ? When is your heat not working? When you remote start OR when you turn to ACC ?
#45 of 50 Re: heat wont turn on when I use auto start [clopes1969]
by paulvh
Jan 21, 2013 (12:56 pm)
To add : depending when you experience the issue is might be a fuse ( the remote start has a number of separate fuses and one might be broken) However before trying and measure that (which require you to be upside down in the car) let's try to understand the conditions to diagnose.
#46 of 50 Re: heat wont turn on when I use auto start [paulvh]
by clopes1969
Jan 22, 2013 (5:03 pm)
The heat works fine under normal conditions; when I turn the car to the ACC position the digital readout on the top of the radio only shows the radio still working from this position. The manual says to set your heat to the controls you desire for the auto start in the ACC position and it will turn on in auto start. When I try to turn it on from the ACC it does nothing....thanks for your reply; I hope j better explained myself this time
#47 of 50 Re: heat wont turn on when I use auto start [clopes1969]
by paulvh
Jan 23, 2013 (1:03 am)
This looks to be an issue with HVAC1 and/or HVAC2 fuses in the remotestart controller. Then you get this problem with your AC and heater.
Look at http://www.mazdaparts.org/macxreenst1.html
There is a link documentation, on page 5, you see the diagram for the fuses.
Check both fuses HVAC1 and HVAC2.
There used to be systematic problem with this fuse blowing and a new wiring harness was required. (TSB-01-046-08). Not sure whether that had been applied to your car. The dealer should be able to tell you from the MAZDA maintenance system.
#48 of 50 Re: After market remote start [raykal]
by jptowns
Jan 23, 2013 (6:01 pm)
I had the exact same thing and when using remote start the red KEY light stays on. Dealer trying to tell me that's natural. I am extremely frustrated. 2nd Mazda from this dealer and likely the last.
#49 of 50 Re: heat wont turn on when I use auto start [clopes1969]
by jmclean43
Jan 24, 2013 (2:55 pm)
I am now having a similar problem in my 2008 CX9 with factory/dealer auto start. Car starts remotely, but neither heat nor seat warmers turn on until I manually turn car in to on position. Problem just started and I bought new from dealer . Any thoughts? Thanks.
#50 of 50 Re: heat wont turn on when I use auto start [jmclean43]
by clopes1969
Jan 24, 2013 (7:11 pm)
Check the reply I received; its #47....I was told that it is most likely a fuse within the control box for the electric starter