Ask the Car People.SM


Ford Mustang Transmission Problems

151 messages,  Last post on May 01, 2013 at 5:39 AM

You are in the Ford Mustang Forum.

What is this discussion about? Ford Mustang, Ford, Coupe, Convertible

Messages Page 7 of 16

#54 of 151 Re: 2009 Mustang GT V8 manual [skvp1] by tammy12

Jul 07, 2009 (9:00 pm)

Replying to: skvp1 (Jul 07, 2009 8:34 pm)
it sure seems like edmonds would forward all these issues to ford so they can do a recall on these cars.. my 06 v6 5 speed manual convertible is now almost 2 years old and i still have clunking at low rpms.. and ive brought it in several times. ive heard it all.. including i just dont know how to drive a 5 speed.. im 41 and almost all of my 17 cars new and used were 5 speeds.. then they said all 5 speeds sound like that but i had seepage of sound into the cab of the car so they changed a boot to keep the sound out of the car.. believe me ive had enough and that was the first and last time i buy a car without test driving.. i ordered the car from another state to get the one i want.. i should have stuck with a lincoln, tammy

#55 of 151 Re: 2009 Mustang GT V8 manual [tammy12] by skvp1

Jul 08, 2009 (5:03 am)

Replying to: tammy12 (Jul 07, 2009 9:00 pm)
Did you have that clunking sound when it was new or did it show up later?

#56 of 151 Re: 2009 Mustang GT V8 manual [skvp1] by tammy12

Jul 08, 2009 (8:21 am)

Replying to: skvp1 (Jul 08, 2009 5:03 am)
from new!!

#57 of 151 Re: 2009 Mustang GT V8 manual [skvp1] by browneyes2blu

Jul 09, 2009 (2:02 pm)

Replying to: skvp1 (Jul 07, 2009 8:34 pm)
ive own 2 gt tang.thy both done it.i still have the 08,the 07 i was so ashame to drive it it sounded so bad.i havent got no answer from them.they did change the safty clutch switch,they even foam up the clutch rod.after a while it would do it again.i hate the dang noise.my dealer wont tell me anything about it.i go to another dealer,they dont want to say anything about it.if you find out anything,let us know.

#58 of 151 Re: 2009 Mustang GT V8 manual [tammy12] by browneyes2blu

Jul 11, 2009 (10:57 am)

Replying to: tammy12 (Jul 08, 2009 8:21 am)
my 07,i bought it at dealer.it had 96 miles on it.i came back week later,picked it up,drove it to tn. i was driving around town,it started clucking.i took it back at least 5 times for same problem,they put some foam on the clutch rod,it was quite for a while,then it started back with the noise,then they put a clutch safty switch on.it was quite for a while,then started back noise again.i traded it in at 12,850 miles for this 08,now borth are gt 5 speed 4.6.ok,after a couple hundred of miles the 08 is doing the same thing.ive got 10 thousands miles on the 08.it had 106 miles on it.both was sold to me as new cars.if you or anyone recieves any imformation on this problem, pls. lets the rest of us know,ill do the same.

#59 of 151 2009 GT V8 stick by skvp1

Jul 13, 2009 (7:03 pm)

After driving this 3 weeks I say - obviously it cannot be compared to a Honda.
The pony wants to run and like someone said it takes a bit to get the shifting down. Face it the car wants to kick butt.

#61 of 151 1st and Reverse hard shift by ramamoe

Jul 25, 2009 (8:24 pm)

Hi
I have a 2007 Mustang V6 with a T5 manual tranny. About 50% of the time the tranny is perfect.Sometimes it won't go into first or reverse . I have pulled so hard on the stick I thought it would snap and then like flipping a switch it will fall right into place..once the car is going the transmission works and sounds perfectly. It has no noises , no grinding , no slipping and no leaks..Ford told me it is " normal operating condition" BU%^&IT...Any suggestions would be appreciated
 
                                                                         Thanx

#62 of 151 Re: 1st and Reverse hard shift [ramamoe] by browneyes2blu

Jul 26, 2009 (8:39 pm)

Replying to: ramamoe (Jul 25, 2009 8:24 pm)
all the dealers say no problem,take it back,bug them.

#63 of 151 replacement linkage 07 V6 T5 tranny by ramamoe

Aug 25, 2009 (6:35 pm)

HELP,,I am having a hard time locating a part. Does anyone out there know where you can pick up a stock shift linkage for my 2007 V6 5Sp T5 tranny?? Ford wants to sell me the entire shifter assem. for $600.00 Can. All I want is the linkage. It is a 3/4 " square steel rod about 10" long with to studs at either end. Or is there an aftermarket linkage that will work Thanks Guys and Gals in advance
                                                                            RAMAMOE

Messages Page 7 of 16

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement