Ask the Car People.SM


Nissan Murano CVT Transmission

695 messages,  Last post on Jun 05, 2013 at 7:31 AM

You are in the Nissan Murano Forum.

What is this discussion about? Nissan Murano, Bugatti, Transmission, SUV

Messages Page 48 of 70

#469 of 695 CVT through the years - Murano by whitestar16

Apr 24, 2010 (8:35 am)

Actually the problem rate on the 2007 model year - the last year of the 1st generation model murano - was very low. There were a large number of technical service bulletins and a few recalls , particularly on the 2003 and 2004 model years, that caused good changes over time -- so the 2007 year was actually a good one as far as repairs and problems. 2009 was a first year new model, but I think a lot of those bugs have been worked out since the 2009s went into production, which was actually in late 2007 of all things. So 2010 is a good model year for Nissan on the Murano so far, and their third generation murano, due out in 2012, probably will be a major winner.

#470 of 695 Re: Nissan Murno CVT [dsfinger] by mikev4

Apr 24, 2010 (11:16 am)

Replying to: dsfinger (Apr 24, 2010 5:57 am)
I do not think we should let them off the hook. I will display my message on all the sites I will have an assess to.

#471 of 695 CVT History by smarty666

Apr 24, 2010 (11:54 am)

I everyone, listen some poster by the name of madpistol posted this on the Altima CVT forum and I thought it made a lot of sense in explaining why a lot of 1st Gen Murano owners are having so much trouble with transmission issues and failures. I'm not saying Nissan should be off the hook, they most certainly shouldn't. but I found it insightful about where the CVT started and where it is going and explaining why some people are experiencing lags or jerkiness at times. I personally, in my 2010 Max have not experience this yet, but I only have 7k miles so I have no idea if it will ever happen or if it will, not yet anyway.
 
  
"However, I do get some jerkiness at speeds under 40mph. My guess is it's just because the CVT has a limited number of set ratios at lower RPMs. I know it's the CVT "shift-logic" because if you move it over to manual mode and shift it that way, the engine is very smooth and pretty refined feeling. There's absolutely no jerking in manual mode other than what you feel when you shift between ratios.
  
(Now enter theory stuff)
  
I believe that with the next generation of Altima we'll see both engines get significantly redesigned. Now that Nissan has established that CVT-based vehicles are what they wish to pursue, I think they're going to start designing their engines around this. As of right now, they're currently designing the CVT to be compatible with their chosen engines. However, if you design the ENGINE to also be compatible with the CVT, the refinement will reach a whole new level.
  
The current engines are very content with a manual gearbox, but a little sluggish with the CVT. That's because the engines aren't designed to take advantage of a CVT's gearless system. In other words, the engines have very specific power bands, and thus, it only feels energetic when the engine is in that power band. I believe we're going to see more torque and horsepower from lower RPMs and the peak will be far lower in the rev-band as well. That way, cars will feel much more energetic from a stop AND there won't be a "flat line" on power between 2000-3000RPMs (in the 4-cyl). This should also eliminate jerkiness from the lower revs, as the CVT won't have to shift as much to keep the power up.
  
1st generation CVT: high rev acceleration, rubber-band feeling
  
2nd (current) generation CVT: smoother acceleration, higher horsepower engines
  
3rd (future) generation CVT: engines designed for CVT, MUCH quicker acceleration, more linear power delivery.
  
This is only speculation, but if you're a fan of CVT based Nissan cars, I think it's about to get a lot better in the 3rd generation. The first 2 generations were test beds to see if it would work. Now that Nissan knows it works (and is selling well) they should invest a lot more in their powerplants this time around. Only time will tell though. "

#472 of 695 Re: Nissan Murno CVT [dsfinger] by mikesmurano

May 03, 2010 (1:17 pm)

Replying to: dsfinger (Apr 24, 2010 5:57 am)
Consumer Report's staff are seriously a bunch of idiots.
 
Their testing methods and statistical data gathering are a joke.
 
I do not rely on anything they say. You are better off consulting Car & Driver or Motor Trend.
 
CP has always about political correctness not accurate reporting.

#473 of 695 Re: Nissan Murno CVT [mikesmurano] by smarty666

May 03, 2010 (6:16 pm)

Replying to: mikesmurano (May 03, 2010 1:17 pm)
CR, JD Power, and even MT are no good anymore for reviews and unbias ratings/comparison assessments. When MT can rate the Camry #1 above the new Sonata, Fusion, and Altima for overall fun, driving dynamics, and overall package, etc, after all the recent recalls and safety problems with those cars, they must be either bias for Toyota or smoking some serious dope. I'm seriously thinking of canceling my subscription at the end of this next cycle.
 
As the years are going on, its getting harder and harder to find magazines or professional car forum that doesn't have bias in its assessments.
 
Right now, edmunds, autoblog, C&D, Road and Track, and Popular Mechanics are probably your only bets left for fair and balanced/unbias comparisons and reviews.

#474 of 695 Over & Out by m0mzilla

May 04, 2010 (2:56 pm)

I'm finally turning off my tracking for this issue. Nissan did reimburse me for the cost of my transmission at 68k miles in my '05 Murano (which went out 2 yrs ago). My dealer acknowleged the problem back then and I only paid half of the $5,800 cost. So, I was fully reimbursed and I used the money to put down on a 2010 GMC Acadia. Decided to buy American this time. Wish me luck!

#475 of 695 Re: Where's JD Power now that I've owned my Murano for a year and a half? [kellyd7] by sixtwentysix

May 17, 2010 (1:59 pm)

Replying to: kellyd7 (Feb 17, 2010 8:26 am)
May I ask, how much was the repair for your windshield wiper motor? My driver side one occasionally stops working and now, last friday, stopped all together. Super annoying. Taking it to the dealership but I don't really want to get railed so I'm looking for an average price.

#476 of 695 Re: 2003 Murano Transmission problem [warelf] by corey2000

May 18, 2010 (7:02 pm)

Replying to: warelf (Jun 18, 2007 10:36 am)
I just bought a used 2003 Murano, and it's doing the same thing. It didn't do it during the test drive but it's done it ever since i purchased it.

#477 of 695 Re: 2003 murano transmission [mikey69] by mikev4

May 19, 2010 (9:36 am)

Replying to: mikey69 (Apr 14, 2010 1:18 pm)
They are lying,
CERTIFICATION
I (We), ___________________________________________________________________________ , hereby submit this form requesting
reimbursement for expenses incurred in connection with repair or replacement and/or related towing of the CVT on
my model year 2003–2010 Nissan. I certify that these repairs have been made to this vehicle and that they were
not previously paid for, in whole or in part, by Nissan

#478 of 695 CVT Problems by epacheco

May 25, 2010 (12:15 am)

I have a 2000 Nisson Serena with a CVT. It gets stuck in low when in slow or stop and go traffic. It will not dissengage unless i stop and turn off the van for 20 minutes. It also slips into as high ratio after going up inclines, almost like an anti-slip mode. Whats wrong and can it be easily fixed?

Messages Page 48 of 70

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement