Last post on Nov 28, 2013 at 1:16 PM
You are in the Chrysler Cirrus
What is this discussion about?
Chrysler Cirrus, Sedan
#76 of 92 Re: 99 cirrus stalling after chaning almost everything!! [sighberlass]
Jan 10, 2013 (6:25 pm)
I have the same problem with my car too!! I changed the MAP sensor but it didn't fix the problem. Now mechanics are suggesting me to change the PCM which costs about $350 at advance autoparts. So I'm not sure whether I should change the PCM or just keep driving it the way it is
#77 of 92 Re: 95 chrysler cirrus will not fire [bpeoples2010]
Jan 10, 2013 (6:29 pm)
Was your problem fixed by changing the alternator?
#78 of 92 My car doesn't turn on
Jan 10, 2013 (7:09 pm)
Hi, I have a 1998 2.5 L Cirrus. It was running perfect last week. But two days ago I came back home and left it for two days and now it doesn't turn on anymore. When i turn the ignition, it makes cranking noise which means it's trying to start. So at first I thought my battery might be weak so I put a new battery in but it still isn't turning on Anybody has any ideas for me?
#79 of 92 Re: My car doesn't turn on [neel1235]
by Kirstie@Edmunds HOST
Jan 13, 2013 (6:49 am)
This might be a good question for our Answers team:
If you post a question there, you can either bookmark the page, or return to the link above and click "my answers profile" to check for feedback.
#80 of 92 1998 chrysler cirrus
Feb 18, 2013 (4:12 pm)
hello. I have a 1998 chrysler cirrus and im running into an issue. It runs great in idle,but soon as i shift it into a gear and step on the gas the SOB cuts off. I recently replaced the battery, the distributor, the spark plugs, the rotor, the egr valve,the air filter, the wires, and the axle. all of which could have caused this. please im in need of help, if you have any suggestions or can point me in the right direction i would appreciate it.
May 09, 2013 (3:15 am)
My '97 cirrus blows a 20 amp fuse under the hood after a few drives and then will not start. My mechanic is stumped. Anyone know why?
#82 of 92 Re: 1998 chrysler cirrus [rlwalsh]
Jun 03, 2013 (5:47 am)
sounds like fuel pump that was my problem
#83 of 92 2000 Chrysler Cirrus running issues
Jun 27, 2013 (9:51 am)
I have a 2000 Chrysler Cirrus with the 2.5 V-6 that is having issues staying running. When I start the car and let it idle, it seems to run fine. After it warms up and when you rev it up to 2000 RPM's, it will start to bang, pop, backfire and run rough. The RPM gauge is all over the place. Eventually it will shut off after a few minutes of this. We have tried the throttle positioning sensor, new cap and rotor and it still is doing the same thing. When it did this at first, as soon as it did it and we got the car pulled over off the road, we looked under the car and the catalytic converter was glowing red, so we though maybe it was plugged. The converter was punched out and is totally clear and that didn't help either. Anybody have ideas on this? I've read a lot of other post about this, but some say to do this, some say to do that, and some seem to work for one person, but not the other................At a loss right now!