You are here:
Forums
Sedans
Chrysler Cirrus
Chrysler Cirrus Starting/Stalling Problems

24 messages, Last post on Nov 15, 2009 at 9:13 AM
You are in the Chrysler Cirrus Forum. Your Hosts are pat & karens
|
|
|---|---|
|
Replying to: spencers225 (Aug 06, 2009 1:05 pm) I have checked the coil and distributor with an ohmmeter and everything checks out. I can hear the fuel pump kick in when I turn on the ignition key, and have tested absolutely everything with no spark yet to the engine. 266 000 kms, no problems whatsoever and now sudden death. I will replace a few things in an effort to resolve this issue and post if anything works. nuts, - Wally
|
|
|
|
|
Replying to: wallymaven (Aug 08, 2009 7:53 am)
|
|
|
Replying to: spencers225 (Aug 11, 2009 10:00 am) |
|
|
|
|
PLEASE HELPOk I have 99' Chrysler cirrus, that i have just replaced the crank shaft position sensor, idle air control, and EGR valve, and its still not fixed. The rpms will go crazy, oil light & cruise control light comes on, and it will stall, but sometimes it will run for and hour or two with no problems but other times its irraitic..I have heard it may be plugs/wires, distubotor cap, coil pack,cam sensor,and battery(just bought a new battery).. Tired of the guessing game.. Ready to junk this POS!!! Any suggestions, would be greatly apprecitated.. 2 hours ago - 4 days left to |
|
|
|
|
Well i took my 99' Chrysler Cirrus to the dealership and found out that the crank postion sensor, was a bad one and that i have oil leaking down my distubutor shaft, replacing that sensor has takin care of some of the problem, but my oil light still comes on along with service engine soon light..taking back to the dealer Monday.. |
|
You are here:
Forums
Sedans
Chrysler Cirrus
Chrysler Cirrus Starting/Stalling Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2000 Chrysler Cirrus



Browse by Board
Browse by Topic