Ask the Car People.SM


Mitsubishi Mods

56 messages,  Last post on Dec 08, 2007 at 12:44 PM

You are in the Speed Shop Tuning and Modification Forum.

What is this discussion about? Mitsubishi, Performance Mods, Coupe, Convertible, Sedan, Wagon

Messages Page 5 of 6

#37 of 56 Re: Stock 95 3000GT SL-Best bang for my buck? [tbone45] by Mr_Shiftright HOST

Dec 26, 2005 (2:40 pm)

Replying to: tbone45 (Dec 26, 2005 1:09 am)
Yeah if you found a decent CAI you might get up to 3-8HP for $200/$300.
 
If you can get a larger throttle body plate that might give you 5 HP for $300---if you can find one for your car---might be tough.
 
An exhaust header pipe would give you maybe 2HP, or 3 HP.
 
A free flow muffler (cat-back) might give you 1 or 2 HP.
 
That's about it for the "cheap" stuff...figure 10 to 20 HP for $1,000. That's not too bad.
 
Otherwise you need to pretty much start taking apart the engine and spending lots of $$. At that point with a car like yours, you might consider just investing in a faster car, because your 3000 has a big weight problem, which is a tough issue to solve.

#38 of 56 Need two wheels for my 3000 GT 95 by ribeiromiguel

Feb 25, 2006 (5:09 pm)

Please I need address where I can buy 2 wheels. Thanks for yours help.
Miguel

#39 of 56 Re: Need two wheels for my 3000 GT 95 [ribeiromiguel] by Mr_Shiftright HOST

Feb 27, 2006 (8:35 am)

Replying to: ribeiromiguel (Feb 25, 2006 5:09 pm)
You mean stock wheels?

#40 of 56 95 rocker panel moulding by jczar58

Mar 09, 2006 (7:55 am)

I'm looking for a passenger side rocker panel moulding for my 95 3000GT SL spyder. Does someone know where I can get one at a reasonable price ? Thanks , Joe

#41 of 56 Tranny in "Limp-in mode" HELP! by slickness

Mar 29, 2006 (1:36 pm)

Hi everyone, I have to 3000GT SL automatic. Everything is generally running fine, but the automatic transmission is in bad shape. I just recently bought a used japanese tranny and got it professionally installed. But even after they put the 2 sensors in the correct place, the tranny is still in limp mode. Which means it doesnt shift at all, and its always on 3rd gear.
I need help to figure out the wiring for 3 wires (coming out of the tranny). Its a for a sensor, and the 3 lines were cut. So I need to know which goes where because the colors don't match. Its black, green/yellow, and green/black. The new colors are black, green, blue.
Can someone help me?
If you can compare the colors and the order of the lines coming from the tranny (left to right).

#42 of 56 Droppin the package by senorlobo

Apr 01, 2006 (10:46 pm)

I recently bought a 3000 and want to buy lowering springs for it. But it came with the option ECS, I wanted to know if the springs will effect the ECS, or if i will just have to buy a complete coil over package?

#43 of 56 thinking about buyin 1 by mex1can

May 10, 2006 (8:42 pm)

What up... im thinking about buying a3000 and i would like to know if there is a common prob. with the 95 series. just wondering. dont want to shoot myself in the foot... agian, thx

#44 of 56 Same as above by liveandletdie

Jul 08, 2006 (2:01 pm)

Is there anything I need to know before I buy one?

#45 of 56 Re: Same as above [liveandletdie] by steve_ HOST

Jul 08, 2006 (3:42 pm)

Replying to: liveandletdie (Jul 08, 2006 2:01 pm)
Check out the Mitsubishi 3000GT help discussion too.
 
Steve, Host

#46 of 56 Want better throttle response 3000gt base by shaggy3000gt

Apr 11, 2007 (8:25 am)

I have a 96 3000GT with a strong engine and new trans but would like to get a little better throttle response/initial acceleration. Are there any easy relatively inexpensive modifications that could accomplish this? K&N filter?, cold air induction, cat back exhaust etc. Will any of these make any noticeable changes? Thanks

Messages Page 5 of 6

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement