Ask the Car People.SM


General Intake / Exhaust Mods

864 messages,  Last post on Sep 29, 2009 at 11:20 PM

You are in the Speed Shop Tuning and Modification Forum.

What is this discussion about? Performance Mods

Messages Page 85 of 87

#835 of 864 headers for my s40 by jims40

Jan 12, 2006 (6:02 pm)

i want to upgrade my whole exhaust system the headers, turbo downpipe to the cat, muffler, everything could somone tell me a good website or somone to call caus its pretty hard to find out about volvo performace parts i also want an intake but im pretty sure k & n will work

#836 of 864 Re: headers for my s40 [jims40] by Mr_Shiftright HOST

Jan 12, 2006 (7:42 pm)

Replying to: jims40 (Jan 12, 2006 6:02 pm)
we answered this in your duplicate post:
 
www.ipdusa.com
 
www. volvospeed.com

#837 of 864 cutlass supreme computer problems by oldsboy

Feb 08, 2006 (12:51 pm)

I've just recently replaced the computer in my 90 cutlass supreme. 2 days later i've got more problems. car is is idling funny in gear and then stalls. brought it back and the mechanic hooked it up to the computer and decided that the o2 sensor needed to be changed. worked alright for 4 days and then i noticed the same problem again. brought it to another guy who hooked it up to the computer and thought the engine idle motor (is that the right name?) may need to be replaced. 1st he just cleaned it out and told me to see if that makes a difference. it did for 2 days. brought it back to him (great guy, wasn't even charging me!) and he said that the computer would show something, they'd check it, then the computer would show something else when they hooked it back up. he doesn't wanna go and just change every part with out knowing if it is the main problem (nor do i want him to) has anyone out there dealt with anything like this before????

#838 of 864 Re: cutlass supreme computer problems [oldsboy] by Mr_Shiftright HOST

Feb 08, 2006 (4:16 pm)

Replying to: oldsboy (Feb 08, 2006 12:51 pm)
Hi oldsboy!
 
Welcome to the Forums.
 
You seem to be on the wrong board so let me re-direct you to our "Technical Questions" discussion, in our Maintenance & Repair Board.
 
Here's the link for you. Just cut and paste your question and re-post it here:
 
Technical Questions Discussion
 
best
 
MrShiftright
Co-Host

#839 of 864 Olds headers by fastwagon

Mar 01, 2006 (12:43 am)

Chevy headers will not fit an Olds engine. They're completely different engines. Check the major performance suppliers for an exact fit(Jegs,Summit,etc). Also, go to Realoldsperformance.com for a forum just for Oldmobiles.

#840 of 864 99 cavalier header by cavyneedswork

Mar 07, 2006 (9:41 am)

I was just wandering is their anyone in here that has had results from any certain header for a cavalier i was goin to go with a pacesetter but i havent heard any good results about them. can any one also tell me the difference between a 4-2-1 header and a 4-1 header? thank you

#841 of 864 my olds wont start in the afternoon by matpar

Jul 24, 2006 (4:23 pm)

my 96 olds culass starts like a champ in the morning..but by afternoon..most time it wont even turn over..i only have this problem in the summer..my mechanic says he cant find anything wrong with it! it's very frustrating, because it's my only method of transportation..the ignition system was replaced on the steering column..i'm at my wits end!!
please, anyone heard of this or know where i can start??
thanks in advance!!

#842 of 864 95 Cutlass Supreme shifter light and cig. lighter by vistajvoth

Jul 25, 2006 (2:17 pm)

I bought this car the 30th of June and it runs great so far. My problem is that the light that shows what gear you are in and the ciggerett lighters don't work. My hubby has checked the fuses and he said that they are good. Do you have any ideas for me to use to find out what is wrong?

#843 of 864 headers for my 92 by lil_e

Nov 24, 2006 (6:22 pm)

Is it ok t0 put headers on my 92 silverado without messing up the computer on it

#844 of 864 Re: headers for my 92 [lil_e] by Mr_Shiftright HOST

Nov 24, 2006 (6:43 pm)

Replying to: lil_e (Nov 24, 2006 6:22 pm)
As long as the headers can accomodate the 02 sensor and have a fitting for it (in other words, the headers aren't made for off-road use) .

Messages Page 85 of 87

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement