Sign In Join 



Subaru Legacy/Outback Accessories and Modifications

144 messages,  Last post on Aug 02, 2009 at 12:55 PM

You are in the Subaru Legacy & Outback Forum. Your Host is kcram

What is this discussion about? Subaru Legacy, Subaru Outback, Performance Mods, Sedan, Wagon


Messages Page 13 of 15
1
...
9
10
11
12
13
14
15
Prev
Next
Last
Go To Msg #
Search This Discussion

#115 of 144
Lost in the Woods by imoutnow06
Jan 09, 2008 (10:24 pm)
Reply
I just bought a 03 Legacy 2.5DOHC GT LTD and beleive it has potential what should be my first move to making this car FAST!!!!
#116 of 144
Re: Lost in the Woods [imoutnow06] by paisan
Jan 10, 2008 (4:52 pm)
Reply

Replying to: imoutnow06 (Jan 09, 2008 10:24 pm)

There is little to no potential in making it fast. the 03 Legacy GT was also a SOHC, not a DOHC.
 
At most you can get about 10hp gain out of it with a lot of money spent.
 
You are better off doing a motor swap (about $7-10k) or selling the car and looking for a turbo legacy or wrx.
 
Sorry but that is the reality of it, I've been tuning and working on subies for 10 years...
 
-mike
#117 of 144
Shop Manual by brian08
Jan 23, 2008 (8:56 pm)
Reply
Where is the best place to get a shop manual for an 08 H3
#118 of 144
Yakima adapter to subaru rails? by brian08
Jan 24, 2008 (1:07 pm)
Reply
Is there an adapter so that Yakima bars can be used with the subaru rails? I allready have the Yakima bars.
#119 of 144
Re: Yakima adapter to subaru rails? [brian08] by ateixeira
Jan 25, 2008 (7:44 am)
Reply

Replying to: brian08 (Jan 24, 2008 1:07 pm)

I recall from the early days of the Forester that yes, Yakima made clamps for Subaru, at least for that model.
 
In fact now that I think about it, I think Subaru included Yakima-made accessories in its OE catalog.
 
You should be able to find them for yours, maybe even from a Subaru dealer or parts wholesaler.
#120 of 144
opening hatchback from inside by kikoandkanita
Jan 25, 2008 (10:42 am)
Reply
I was wondering if there is a way to open the hatch of a 2008 outback from the inside. I like to lay on the back with my dogs but if I lower the hatchback, it latches and the only way out is through the passanger doors. The dealership has no ideas. Any ideas on how to rig it? Thanks in advance.
#121 of 144
Re: opening hatchback from inside [kikoandkanita] by ateixeira
Jan 25, 2008 (10:44 am)
Reply

Replying to: kikoandkanita (Jan 25, 2008 10:42 am)

Not by design.
 
You may be able to rig something, though.
 
The trunk releases were only required on sedans.
#122 of 144
'99 legacy upgrades by subiecouple
Mar 04, 2008 (12:50 pm)
Reply
Hello all. I recntly aquired a '99 legacy L, 30th anniversary edition. I had to replace the speedo, from what i read this is fairly common, and in doing so found that the wiring is in place for the factory driving/fog light switch. So, i purchased a switch, ligths and brackets from a '99 limited from a reputable salvege yard. My problem is, I cant seem to locate the lamp end of the wiring for the lights. In my experience with past subies, they seem to be all prewired for everything. Is this the case? Has anyone else had any experience or success with this upgrade? I want them to work, and it really would boost the appearance of the car. Any help would be appreciated. Thanks!
#124 of 144
1995 Subaru leagacy audio system by taskuchan
May 18, 2008 (12:54 am)
Reply
I'm looking to upgrade my audio system. Im not sure about how to start at it. I know I'll have to do all new wiring as whats in the car is still factory. I also have no experience in this area. Any suggestions as how to go about this would be greatly appreciated.

Messages Page 13 of 15
1
...
9
10
11
12
13
14
15
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement