You are here:
Forums
Coupes & Convertibles
Chevrolet Corvette
Chevrolet Corvette Transmission Problems

90 messages, Last post on Oct 26, 2009 at 8:05 PM
You are in the Chevrolet Corvette Forum. Your Host is claires
|
Replying to: kneargarder (Apr 27, 2009 11:23 am)
|
|
| i am trying to find out if my lt1 350 is compatibale with any corvette transmition...looking for any info ...all comments will help | |
| How do I adjust the park lock linkage? | |
| I posted earlier about a 2005 corvette lemon ( auto trans failed ) that I bought new. After 3 years of driving a Mustang Cobra, I decided to give GM another chance. I bought a used 08 corvette with AT, Navi, F55, mag red, perf axle, dual mode. I really love this car and the auto transmission. I love the paddle shifters - they work well in my opinion. They are necessary to keep the RPM's high for spirited driving. The only thing I have noticed is there is a dead spot when going around corners at low speed. When the AT dowshifts from 3 to 2 it takes a little more time than it should. I hit the gas, the rpm's go up, and then the car lurches into 2nd gear. A little annoying but a small price to pay for the paddle shifters. Also, I would really recommend the F55 magnetic selective ride control too.... | |
| unless you put pressure on the stick as you let the clutch out. That is, it doesn't completely engage with the shifter alone. As soon as the clutch is halfway out or so, it pops into gear and then it's fine. I took it to the dealer a couple of times and got the standard "we can't adjust it any better" and then learned to live with it. However, my wife, who drives the car less frequently than I do, just said that she thinks it's getting worse. Has anyone have a similar experience with this, and if so how did it turn out? | |
I have a 2008 coupe with 1300 miles. I took it to the dealer for a shift problem, it was stuck in in maybe 3rd and the engine light came on. The dealer fixed the problem with a pressure control solinoid. The problem I now have is when I put it in drive, there is a hesitation up to 5 seconds before it ingages. I took it back to the dealer again and they said that this is a normal condition. This doesn't seem normal to me. I was wondering if anyone else had the same problem?
|
|
|
|
|
Replying to: realtime (Apr 27, 2009 12:09 pm) |
|
|
Replying to: rolinski (Sep 03, 2009 4:07 am)
|
|
|
|
|
Replying to: bolivar (Sep 06, 2009 2:32 am)
|
|
|
Replying to: kneargarder (Sep 07, 2009 6:11 am) |
|
You are here:
Forums
Coupes & Convertibles
Chevrolet Corvette
Chevrolet Corvette Transmission Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Corvette



Browse by Board
Browse by Topic
Today's Chats