Sign In Join 



Chevrolet Corvette Transmission Problems

90 messages,  Last post on Oct 26, 2009 at 8:05 PM

You are in the Chevrolet Corvette Forum. Your Host is claires

What is this discussion about? Chevrolet Corvette, Coupe, Convertible


Messages Page 7 of 9
1
...
3
4
5
6
7
8
9
Prev
Next
Last
Go To Msg #
Search This Discussion

#60 of 90
Re: Thanks, who can I contact? [tmerriss] by abcoh62
Apr 25, 2008 (6:57 am)
Reply

Replying to: tmerriss (Dec 05, 2007 7:24 am)

You need to tell your service department to get the regional GM guy involved. I invoked the lemon law here in Dallas and got a new 08 to replace the 06. There was some money exchanged due to mileage and difference in pricing but I got the new car. All I had to say was, buy it back or give me a new car to the Dealer and he found the regional person. From then on, GM took care of it. They have an entire department that deals with this but it has to start with the regional person.
#61 of 90
2008 corvette 6 speed problems by mog8
May 22, 2008 (12:00 pm)
Reply
I purchased a 2008, and have encountered shifting problems. When the car is cold there is a wash board action when shifting from 1st to 2nd and 2nd to 3rd . After about 15 miles the problem is better but not gone. The dealer showed me a letter from chevy saying the problem is normal and to take no action. The lemon law states that they must attempt to repair the vehicle 4 times, the letter stops the repair cycle.I have a case file started, but it will take more people complaining to solve the problem. Mog8
#62 of 90
Re: 2008 corvette 6 speed problems [mog8] by lilpuu
May 22, 2008 (2:39 pm)
Reply

Replying to: mog8 (May 22, 2008 12:00 pm)

I have a 2008 Corvette and I to get the wash board effect when it is cold. If the Manufacturer has a bulletin out on this what will it take to fix it? What is the problem and why does it do that?
#63 of 90
Re: 2008 corvette 6 speed problems [lilpuu] by mog8
May 22, 2008 (5:15 pm)
Reply

Replying to: lilpuu (May 22, 2008 2:39 pm)

You will need to contact customer service a chevrolet. Call and file a complain and get your case number. jim
#64 of 90
Re: 2008 corvette 6 speed problems [lilpuu] by mog8
May 22, 2008 (7:04 pm)
Reply
i signed up for the corvette forum, but still waiting for email response. The bulletin is number 2073364. The title reads #PIP4357: Noise during the 1-2 shift when cold- key words first grate grind second _ feb 27,2008 recommendation A new transmission synchronizer will make a noise when shifting from 1st to 2nd gear in temperatures at or below 32 degrees, bull it happens at any temp. jim
#66 of 90
Re: 2008 corvette 6 speed problems [lilpuu] by mog8
May 23, 2008 (1:38 pm)
Reply

Replying to: lilpuu (May 22, 2008 2:39 pm)

IiIpuu, I give up on registering on corvette forum, Could you please post the info. for me. thanks, jim
#67 of 90
2008 Corvette Automatic Trans Problem by realtime
May 29, 2008 (9:54 am)
Reply
I just hit 2000 miles on my 2008 Automatic Transmission. I'm not sure how to describe the problem other than the fact that there seem to be "gaps" in the shifting patterns in full automatic mode in drive. To start with when I start the car and back up and then go from reverse to drive , or from park to drive , there is a delay or gap for the transmission in drive to kick in with a feeling like a thud. If I'm in very slow moving traffic , like in a school zone at 15-20 mph, as I take my foot on and off the accelerator to maintain a slow speed when I touch the accelerator the transmission feels loose and these gaps occur which again almost feel like thuds. If I'm slowing down lets say from 40 or 50 mph down to 20 or so to go into a turn and then make the turn and acccelerate to pick up speed again there is another sort of gap where the transmission almost feels like it is having to "catch up" with the engine. Actually, in all of these "gap" like situations it does feel like the transmission is out of sync and is having to again "catch up" with the engine revs. There are no problem noises whatsoever. The "select" mode works perfectly with the paddle shifter. But in drive I have these problems. Has anyone else experienced any similar problems at all ? I have not taken it to the dealer service department as yet. I thought perhaps it might correct itself as the car was "breaking in" but it hasn't.
#68 of 90
Transmission by beachguy
May 30, 2008 (4:14 pm)
Reply
My 08 does the same thing. I posted the question on the corvette mechanic site and was told that , what is called the garage shift ,is normal. I also notice a thud when slowing and them accelerating. I may get it checked by the dealer at the next service.
#69 of 90
Transmission by cfm
Jun 21, 2008 (1:22 pm)
Reply
I own a '63 Chevrolet Corvette Stingray with a 4 speed manual hurst linkage....it's stuck in 1st gear....the clutch seems to be O.K....do I need to put it up on a rack 1st and remove the gear box??
do you think it's the gears???...any help would really be great today..
Thanks,
Marty

Messages Page 7 of 9
1
...
3
4
5
6
7
8
9
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement