Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
SUVs Chevrolet Blazer Blazer Jimmy 4WD Questions
84 messages, Last post on Feb 21, 2009 at 10:17 AM
You are in the Chevrolet Blazer Forum. Your Hosts are steve_ & tidester
| is it possible to completely disengage the transfer case/ 4wd on this vehicle, and how can it be done if possible | |
|
|
| I currently own a 99 chevy blazer. Have never had any major problems until now. well i would'nt call it major just annoying.. 2wd, 4hi and 4L all work and are engaging fine, but when i go from 4H to 2wd it doesent disengage right away it takes maybe 30 seconds and then makes a huge clunk and jolts the car like I just ran over a boulder when changing.. 4L still works perfectly although Im in neutral when shifting in and out.. I need your help | |
|
1998 GMC Jimmy auto transmission with 3 button push for 4 WD. 4.3 engine. I was in 4WD and went to go out but it did not shift and went to what I would call N. I had no power to any wheel. I put it in park and hear a slight grinding and it when into 4WD. I managed to get it home but it was like it popped out of drive and back to N and no power to the wheels. I changed the ball looking vac switch on top or the trasnsfer switch but still have the problem. It will not shift into 4WD then it went to no power again. I put it P and after playing with the buttons it went back to 2WD. Any ideas? |
|
| I have a 2001 LT Blazer, automatic, 4.3 litter, V6, 4x4, Auto 4 WD, (4button), odm 161,952 . I bought it in may 2006 odm 146,241,. The only thing I noticed about it was all the gauges would now and again would jump up and down a few times and then quit , hate when it does that cause it make the gas gauge look like im on empty when in fact im not. The problem im having today is I needed to put my 4Hi wd on but all it does is blink and after some time it goes back to the previous state 2Hi . So I tried to put Auto 4 wd on but it did the same thing, just blinks then goes back to 2Hi. It worked just fine last winter, that was the last time I used it. I got the book out and did the indicator switch adjustment put gear in N push 4Hi then put gear in park, but that didnt work, so I took off the +pos cable to battery for 1 minute and still that didnt work! Ive been searching the forum but havent found any solution to my situation! I hope someone can help please! | |
| my 99 blazer will not shift into 2 high,or 4 low, it appears to shift between auto 4 wheel and 4 high, the service 4 wheel drive light is all ways on. I have changed the transfer case fluid and both deferentals fluids There appears to be no lose wires or connections Help | |
| i have a 99 blazer with the 4 button system and the only time it with engage 4wd is after it has been sitting for aprox. 10 12 hours (overnight). If i wait to push the button it will just flash and throw on the service 4wd button. somthings weird with it and i could use some pointers. i have checked out the past forums on here with some close posts but not the same. this forum is very helpfull, and would like to thank everyone for the info. | |
|
|
| alright i ahve a 99 blazer and it will not shift into 4wd. the lights are not on with the swith and nothing is poping up on the dash about the 4 wheel drive. theres power at the fuse nothings unplugged. What could cause this? anybody know..? w | |
|
|
| 95 chevy blazer not electronic 4 wheel but lever operated. vac actuator under batt tray is shot but i plugged line and pulled and held cable still nothing. was working fine cannot find any vac problems and that should not matter anyway since i manually pulled cable. 4 wheel light does not come on to verify engagement. HELP | |
You are here:
Forums
SUVs Chevrolet Blazer Blazer Jimmy 4WD Questions
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2005 Chevrolet Blazer
2001 GMC Jimmy
Browse by Board
Browse by Topic
Today's Chats
