Honda Ridgeline Accessories and Modifications

Installation is the same as any other models. Many people are going with the Bakflip
G2 if you like the convenience of the fold-up cover. It gives you a lot of useable space in the bed when it is open fully. Installation only takes about an hour and is very easy.

Of course you can get the Retrax, but it takes up quite a bit of room in the already limited space in the bed.

Good luck in your search.

Brad

Replies to this message:

woolyback (Mar 08, 2010 1:28 pm)
- omaita (Dec 17, 2011 2:22 pm)
  - woolyback (Dec 18, 2011 10:57 am)

#17 of 24 Re: Tonnueau covers [sparkland] by woolyback

Mar 08, 2010 (1:28 pm)

Replying to: sparkland (Mar 08, 2010 6:19 am)

Thanks Brad, After doing a lot of research on various models I settled on the Roll n Lock which I should be getting this week.

Replies to this message:

omaita (Dec 17, 2011 2:22 pm)
- woolyback (Dec 18, 2011 10:57 am)

#18 of 24 skid plate by sfitz4

Mar 14, 2010 (10:53 am)

FYI the first skid plate is now available. It is not on their website yet but www.raceskids.com makes them. Just email them for photos and a price. Or you can see pics at the Ridgeline Owners Club http://www.ridgelineownersclub.com/forums/showthread.php?t=33738&highlight=skid+- plate

I'm getting one soon for around $200

#19 of 24 Good place to purchase Ridgeline Accessories by DRice

Aug 27, 2010 (12:10 pm)

I'm picking up a 2008 Ridgeline next week or the next and I'm going to purchase a bunch of accessories.

Does anyone have any recommendations on where to purchase accessories?

I see this topic is sponsored by H and A and I've successfully purchased from them years ago when I purchased my 2003 Pilot new (89,000 miles and not a single problem), so I suspect they watch this forum.

Just looking for another place or two to compare a little. Also, I'm on the east coast so shipping costs and delivery times are something to consider.

If any dealerships are monitoring this forum, feel free to chime in...

Replies to this message:

natalie02le (Sep 03, 2010 8:06 pm)
rcummelin (Dec 22, 2010 3:50 pm)

#20 of 24 Re: Good place to purchase Ridgeline Accessories [DRice] by natalie02le

Sep 03, 2010 (8:06 pm)

Replying to: DRice (Aug 27, 2010 12:10 pm)

i've got a perfect set of factory 17" Chrome-Look Aluminum Alloy Wheels. used less than a year before i sold my 2008 ridgeline (with original RTX wheels). these wheels look great, high polished aluminum (not chrome - will not pit or stain like chrome). i purchased from H and A (they still have them at $337 each). these wheels dress up any Ridgeline.

#22 of 24 Re: Good place to purchase Ridgeline Accessories [DRice] by rcummelin

Dec 22, 2010 (3:50 pm)

Replying to: DRice (Aug 27, 2010 12:10 pm)

I have gotten the best online deals from HandA. Their prices are not always the lowest, but their shipping charges are MUCH lower than other online Honda parts sellers.

Also check eBay as several Honda dealers sell parts there.

#23 of 24 Re: Tonnueau covers [woolyback] by omaita

Dec 17, 2011 (2:22 pm)

Replying to: woolyback (Mar 08, 2010 1:28 pm)

Hi Sparkland, I just get a 2011 Ridgeline and I'm looking for a bed cover too, How is working your Roll n Lock on your Ridgeline?????

Replies to this message:

woolyback (Dec 18, 2011 10:57 am)

#24 of 24 Re: Tonnueau covers [omaita] by woolyback

Dec 18, 2011 (10:57 am)

Replying to: omaita (Dec 17, 2011 2:22 pm)

I like it fine, I installed it myself but it would be easier with two people at certain steps of the installation.
The rails do limit the lid on the trunk space from opening all of the way but it hasn't been a problem for me yet. I have managed to get everything in there that I've wanted to.
The only drawback I've had so far is that if you are loading 4 x 8 sheets of plywood you have to slide them in flat and leave your tailgate down.
If you want them to rest on the closed tailgate at an angle then you will have to cock one side of the boards to clear the rails.
I had a problem with the lid for the spring mechanism coming open but they sent me a modification for it that makes the catch more secure.
I don't think you will be disappointed with it.
Good luck.

« Previous
1
2
3
Next »
Last

To POST a message, please Sign In.

Forum Tools

Search Forums

Enter Keyword(s):

Browse by Category

Browse by Vehicle

Browse by Board

Browse by Topic

View All Topics

Learn More, Do More

Edmunds Community

Explore Edmunds