You are here:
Forums
Wagons
Subaru Crew
Subaru Legacy & Outback
2008 Subaru Legacy

256 messages, Last post on Jun 04, 2009 at 6:47 AM
You are in the Subaru Legacy & Outback Forum. Your Host is kcram
|
Hi, Recently I have tried to do my own tire rotation for 2.5i limited. I jacked up the car and loosen all nuts.. Manage to pull the front tires out with ease. However when it came to the rear tires, I was unable to remove them. Is there a special way to remove rear tires or am I just not pulling hard enough? - I did not want to force the issue as the fronts were so easy to remove. In addition, I have Yokohama Advan A82. From what I have read you're supposed to take the front two tires and just move them to the back on the same side. As for the rear you do a "X" like formation (ex. rear passenger side to front driver side) Any help will be appreciated
|
|
|
Replying to: bigearz1 (May 28, 2009 3:48 pm) Try some penetrating oil and tap lightly with a hammer (with a piece of wood between to protect the wheel). Careful - make sure your jack stands are very secure and do not get under the car. Before you mount them again, clean the rust off. Not sure what you could spread on there to prevent that from happening again, maybe some anti-seize or brake caliper lube (on the face only, not on the threads of the lugs). |
|
You are here:
Forums
Wagons
Subaru Crew
Subaru Legacy & Outback
2008 Subaru Legacy
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Subaru Legacy
2010 Subaru Outback



Browse by Board
Browse by Topic