Ask the Car People.SM


Chevy Silverado and GMC Sierra Starting Problems

492 messages,  Last post on May 15, 2013 at 10:34 AM

You are in the Chevrolet Silverado & GMC Sierra Forum.

What is this discussion about? Chevrolet Silverado 1500, GMC Sierra 1500, Chevrolet Silverado 2500, Truck

Messages Page 49 of 50

#480 of 492 Re: 2011 silverado cold start problems [jwgibson14] by gmcustsvc

Feb 25, 2013 (8:04 am)

Replying to: jwgibson14 (Feb 23, 2013 6:30 pm)
jwgibson14,
Let us know if you want for us to check into anything further with with your dealership (or further document your concerns). We can be reached at socialmediagm.com (include your name and contact information, the last 8 digits of your VIN and mileage, and a summary of the situation).
Sarah, GM Customer Service

#481 of 492 Starting problem 2001 silverado ls 5.3l by manderson91

Apr 17, 2013 (4:43 am)

Went to the gas station, started fine. Went to the grocery store right after started then Immediately died. Everything has power and cranks all day but doesnt start. My fuel pump has been whining the last two days, didn't think anything of it. Checks fuses all are good cant tell if the relays are good. When I turn the key I used to hear the pump now I can't.When i turn the key on and off a couple of time it acts like it wants to stArt but the just cranks. Two weeks ago I replace the sending unit so my fuel gauge worked. It's ran fine since but has thrown p0440 cleared it has t come back on. I know its evap but why was it thrown? I'm going to check the connections where I had to splice the wires on the pump. If that's not it what could it be? I'm assuming fuel pump but I wanna be sure before I buy one. Its at 113k 1owner never had a problem other than knock sensor, at 100k i did a full tune up coils wires plugs coolant all fluids ect..... Oh an I'm removing the bed to work on it. Now as we'll the other day I for some odd reason disconnected my battery while my edge programmer was on and now it's not turning on. I checked the cig fuse and its good, any ideas??

#482 of 492 Re: Starting problem 2001 silverado ls 5.3l [manderson91] by dalerh

Apr 17, 2013 (6:18 am)

Replying to: manderson91 (Apr 17, 2013 4:43 am)
If you saw my post late last year my 2006 GMC Serria 1500 4X4 (only 20K miles) had problems with starting and I found by trial and error. Especially while a tow truck was getting ready to pull it up onto a flatbed he released the parking brake and all of the lights and door chimes came on. Well, the truck started up immediatly. To this day when I push the parking brake pedal in too far the truck will not start. I still do not know what the cause is but it starts every time without the parking brake set. Oh, I also get a message the 4 wheel drive needs service.
 
Good luck

#483 of 492 Re: 2006 Silverado 1500 won't crank [obyone] by manderson91

Apr 18, 2013 (2:57 am)

Replying to: obyone (Jul 17, 2010 2:40 pm)
I'm having fuel problems with my 2001 5.3 silverado has 114k mi. Drove fine then all of a sudden didn't want to start. Two weeks ago i replaced the fuel level sending unit and it has thrown the p0440 code twice since then. but cranked with ease. Replace the fuel pump ran fine the suddenly died while driving. If I turn the key on an off multiple time it acts like it wants to start but fails to do so. Can anyone help me I've tried everything but don't know how to solve the problem. . All fuses an relays are good. I can hear the pump come on when I turn the key but I have no pressure in the check valve. Checked all the fuel line and they are good as well. My next guess was pressure regulator or the throttle sensor. Or evap canister

#484 of 492 Re: Starting problem 2001 silverado ls 5.3l [dalerh] by manderson91

Apr 18, 2013 (3:08 am)

Replying to: dalerh (Apr 17, 2013 6:18 am)
I have full power an the parking brake has been off the whole time. I'm stumped to why It cut out while accelerating then died while I was driving.

#485 of 492 Re: no start [bretly1] by billwh87

Apr 20, 2013 (6:22 pm)

Replying to: bretly1 (Jan 13, 2013 12:20 pm)
No, it is usually the first time I try to start it to leave the house that it will not start. But I have had other times where I would go into the grocery or doctors office, and when I came out, it would not start. It also seems to be worst when there is moisture in the air after it rains for a period of time. Also, without having the key inserted when I open the door after unlocking the vehicle, it will say the message, "phone not available". It is like there are parts of the electronics working even when the key is not inserted in the switch.

#486 of 492 Turn the key and nothing by wlk3920

Apr 28, 2013 (4:19 pm)

I turned the key and nothing. Battery is ok. Grounds a good. Changed starter switch. The is not a continuous problem. It starts and is fine for a day then the next two days nothing. Spoke with a friend of mine last week and he is having a similar problem. I have changed keys and locked and unlocked truck with key. This have been two different places and they are stumped. Any other suggestions.

#487 of 492 Re: Turn the key and nothing [wlk3920] by dalerh

Apr 28, 2013 (4:43 pm)

Replying to: wlk3920 (Apr 28, 2013 4:19 pm)
Do you have the parking brake set when it does not want to start? If you do release the brake and try again.

#488 of 492 00' Yukon will start for 2 seconds then die I have changed everything! HELP by kmount

Apr 29, 2013 (11:30 am)

About a year ago my yukon died on me going about 25 mph. We checked the fuel pump no humming and checked the pressure there was none.. So about 3 weeks ago we finally replaced the fuel pump and it will start for about 2 seconds and then dies.. It is throwing no codes at all.. So this is where it gets intense. We put a new fuel pump relay in it a new fuel filter, a new fuel pressure regulator, a new battery, a new camshaft sensor, a MAF sensor, we started getting pretty sick of throwing money away we know the PCM is giving out signal to everything we test. We tested the crankshaft sensor just to be sure its great the starter is obviousally great. We did a fuel pressure test its to specs we tested ALL the spark plugs and wires.. O YEAH plugs are brand new too! Compression is good on air flow is right.. So we were thinking maybe just maybe its the VAT security but the light doesnt continue to flash after trying to start it so we can do a relearn procedure.. It acts and makes so much sense that may be the issue but how do I know for certain without the light flashing or no codes being read. I dont have any money to tow it to a shop when I have gone thru just about everything myself. HELP!!! It starts up everytime we crank it over for about 2 seconds and then just acts like its shutting its self off. anyone have the same problem? THANKS

#489 of 492 Re: 00' Yukon will start for 2 seconds then die I have changed everything! HELP [kmount] by skeeter54

Apr 29, 2013 (1:46 pm)

Replying to: kmount (Apr 29, 2013 11:30 am)
are you losing fuel or spark to shut the truck down?

Messages Page 49 of 50

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement