Edmunds.com | Inside Line | Auto Observer Your Account | Help | Directory
You are here:
![[F]](http://a332.g.akamai.net/f/332/936/12h/www.edmunds.com/media/townhall/webxicons/site.gif){kind=small}
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Starting Problems
193 messages, Last post on Nov 16, 2009 at 4:26 PM
You are in the Chevrolet Silverado & GMC Sierra Forum. Your Host is kcram
|
|
|---|---|
| now i have a trouble code: PO300 random/multi cylinder misfire. | |
Here is a good one for everybody to help me with. I have a 2000 silverado that had an remote lock when I bought it. THE TRUCK HAS NEVER HAD A REMOTE STARTER. The other night I drove it to the store around 7 pm at 1 am the local police called and asked where I was going. They told me that my truck was running, Sure enough my truck was running with no keys in it and the doors were locked. When I went to shut it off it took my 4 trys of turning the key on and off before the truck stopped. DOES ANYBODY HAVE A CLUE WHAT COULD BE CAUSING THIS. This is the first time to my knowledge in 2 years that this has happened.
|
|
|
Replying to: riley370 (Oct 14, 2009 10:30 pm) |
|
this morning husband went to start cold truck ( which we have had for less than 6 months)with remote start and it wouldn't work>> used key and the lights and panel lit up but vehcile wont turn over>> of course i asked if it was in gear ..(not it).. thought it had something to do with remote start ..so brought spare keys ..(nothing).. Chevrolet is of course closed so.. he doesnt know where to even start..>> husband has to drive back to Ft Campbell in th morning from Ft Knox and I hope we dont have to rent a car just so he can get to work>> whatever help you can give owuld be helpful
|
|
|
Replying to: bowtie24 (Oct 17, 2009 10:14 am) |
|
|
|
| ok today i pulled the vacuum off the fuel injecter pressure regulator and it dumped out gas. from what ive read that means it has failed so ill install a new one today and see if the problem goes away | |
|
|
| replaced fuel injector pressure regulator. engine has started just fine ever since. i still have a slight miss only at idle but i think once the computer adjusts itself this should go away. the trucks response was better on the way to work this morning | |
|
This is on a 03 GMC sierra 5.3L 2WD Sometimes you turn the key and everything lights up as normal but it will not crank. You can jump the starter solenoid and it will crank and start but die as soon as you remove the screwdriver. It may just be minutes or several hrs before it will start. Took it to the shop and of course it always worked fine. Any ideas? I have already had to have it towed once just to have it start up fine when it was dropped off.
|
|
|
Replying to: callen65 (Oct 17, 2009 1:26 pm)
|
|
You are here:
Forums
Pickups Chevrolet Silverado & GMC Sierra Chevy Silverado and GMC Sierra Starting Problems
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Chevrolet Silverado 1500
2010 GMC Sierra 1500
2004 Chevrolet Silverado 2500
Browse by Board
Browse by Topic
Today's Chats
