You are here:
Forums
Pickups
Dodge Dakota
Dodge Dakota Warning Lights and Trouble Codes

97 messages, Last post on Sep 29, 2009 at 4:17 AM
You are in the Dodge Dakota Forum. Your Host is kcram
|
|
|---|---|
|
Hi folkes, need help here, I had my 05 dakota couple month ago, 4.7 V8 auto,qcab,186K, run great, today first time took it to wash, only body and under body, no engine wash. Went home park it, couple hours later start the truck the engine lite on, but the truck run normal, no funny thing happened, try to get the code with on-off-on-off-on, no code shown up, but the engine still on, any idea. Thanks. |
|
|
|
| Before doing anything else I would try to reset the computer by disconnecting the battery and see if that shuts off the engine light. | |
|
|
| Thanks, I will do that. Just other question, am I doing the right way to get the code from the 05 model, on-off-on-off-on, if it is, why no code show up, and should I beware some thing when I wash the truck next time to avoid the engine lite come on again. Thanks. | |
|
|
| Hi there, just a general question, I just brought a OBD II-CAN scanner for my 05 dakota, I just wonder can I hook up the scanner while I am driving, so I can monitor the truck, or if I do that, I will fired all the computer board in the truck. Thanks. | |
|
I have a 2005 Dodge Dakota with a 3.7 6cylinder engine with 38,000 miles on it. About 14 months ago I got the same code p0302 saying miss fire on cylinder #2 the dealer inspected and found nothing and cleared the code. This Sunday the check egine light came on again and I had the codes scanned again I got P0302 code,so with 38,000 mile I decided to change the spark plugs with the original type,after I was finished the codes went away and the next day the check engine light came back on with the same P0302 cose miss fire on # 2 cyclinder. The performance is fine,but I am at my witts end on what the problem might be. I would appreciate any insight on this question. Thanks, Dave M.
|
|
|
|
| I wonder if your problem might not be with the Coil on plug (COP) for cylinder # 2. Might be worthwhile to switch the COP with another one and see if that makes a difference. | |
|
Replying to: cindy215 (Jun 02, 2008 11:17 am) |
|
|
Replying to: treedav (Oct 09, 2008 11:23 am) |
|
|
Not sure if this is the correct thread for my 03 Ram with a hemi. I recently had my fuel pump replaced and I now have this DTC, P0440 Evap Sys Perf. What should I be looking for. The truck is out of warranty and hopefully I can find a quick fix. Thanks
|
|
|
Replying to: budman3 (Dec 12, 2008 2:05 pm) kcram - Pickups Host |
|
You are here:
Forums
Pickups
Dodge Dakota
Dodge Dakota Warning Lights and Trouble Codes
New? Join Now!
Forum Tools
Search Forums
Browse by Vehicle
2010 Dodge Dakota



Browse by Board
Browse by Topic
Today's Chats