Sign In Join 



Dodge Dakota Warning Lights and Trouble Codes

97 messages,  Last post on Sep 29, 2009 at 4:17 AM

You are in the Dodge Dakota Forum. Your Host is kcram

What is this discussion about? Dodge Dakota, Truck


Messages Page 5 of 10
1
2
3
4
5
6
7
8
...
10
Prev
Next
Last
Go To Msg #
Search This Discussion

#38 of 97
Engine codes . . by truckerjohn
Mar 01, 2008 (5:08 pm)
Reply
What is the trick to receiving codes by using the ignition key?
#39 of 97
Re: Engine codes . . [truckerjohn] by kcram HOST
Mar 01, 2008 (6:29 pm)
Reply

Replying to: truckerjohn (Mar 01, 2008 5:08 pm)

With the key in the Off position, cycle it as follows On (not Start)-Off-On-Off-On. The codes will appear in the digital odometer on newer trucks, or the Check Engine light will flash a pattern in older trucks (example: flash pause flash-flash-flash means code 13).
 
kcram - Pickups Host
#40 of 97
Engine codes...10folds5 by 10folds5
Mar 12, 2008 (12:13 pm)
Reply
My '92 Dakota V-6 starts, but barely idles. DTC's are: memory standby power lost and MAP sensor electrical circuit. What can I do to fix this? Any help is appreciated.Thanks
#41 of 97
MIL problem by 1096
Mar 31, 2008 (7:46 am)
Reply
Do you need a code reader to figure out the MIL problem and code #'s. I have a 03 Dakota 4WD 4.7L w/ 26,000 miles. I tried the on-off-on-off-on method but no code # shows up on the odometer.
#42 of 97
brake light by jlabadie
Apr 22, 2008 (2:25 pm)
Reply
I install a new set of brake pads on the front of my 2002 dodge dakota and
   now the brake light stay on and when I put it in drive it blinks. How do I
   reset the light.
#43 of 97
Re: brake light [jlabadie] by echids
May 31, 2008 (1:19 pm)
Reply

Replying to: jlabadie (Apr 22, 2008 2:25 pm)

It sounds to me like your parking brake is hung up!!
#44 of 97
What does this mean? by echids
May 31, 2008 (1:25 pm)
Reply
I have a 2003 Dakota with 3.9l engine and a 5-speed. The check engine light is on when I plug it in it says" manufactured controlled emissions control" What does this mean and where do I start?
#45 of 97
PO432, PO455 by cindy215
Jun 02, 2008 (11:17 am)
Reply
I have a 2001 Dakota Quad cab with the codes PO432, and PO455. I just purchased Friday the air intake system has been redone to a performance intake system and the exhaust could this explain either of these codes and what will it take to fix? Also the light didnt come on until I filled up with gas
#46 of 97
P0500 Code by jwyatt
Jun 02, 2008 (3:13 pm)
Reply
2000 Dakota, 4.7 L, Auto
Today I started my truck and had brake light and ABS light come on. Speedometer did not register speed at first. Later at 60 MPH, the speedo would flop about anywhere from 5 to 10 MPH to 70 MPH. Gas consumption on the computer would register anywhere from 0 mpg to 40 mpg. Finally the check wallet light came on (CEL).
 
When I got home, I checked obd codes by switching off and on three times and got a P0500. Search here did not get a hit. I checked Yahoo and found speed sensor bad is what 500 means.
 
Is this a DIY replacement for an old fart? Cost?
 
Jim
#47 of 97
P0500 Code by ronslakie1
Jun 04, 2008 (3:39 am)
Reply
I have not had this problem but have seen it discussed several times in various Dakota forums. It is a speed sensor mounted above the differential and is supposed to be an easy fix and as I remember the part is not very expensive.

Messages Page 5 of 10
1
2
3
4
5
6
7
8
...
10
Prev
Next
Last
Go To Msg #
Search This Discussion
To POST a message, please Sign In.

New? Join Now!

Forum Tools

Please sign in.
Email Address:

Password:

Forgot Password?

Search Forums

Enter Keyword(s)

Advanced Search

Browse by Vehicle



View All Vehicles
Advertisement
Ask the Community
See What People Are Asking

Browse by Board

Browse by Topic


View All Topics

Today's Chats

Advertisement