Last post on Nov 01, 2009 at 9:06 PM
You are in the Mitsubishi Diamante
What is this discussion about?
Mitsubishi Diamante, Auto Repair, Engine, Sedan
#11 of 13 94 Diamante Timing belt
Mar 31, 2009 (1:15 pm)
After R&R timing belt on 3.0 L SOHC what some one installed wrong way ( cams 180 off). This engine has no interference.Now I have timing marks on cams and crank in position and #1 piston is in TDC , distributor rotor is in #1 position and engine is still not running on all 6 cylinders .
Any one know where could be the problem ?
#12 of 13 Re: Mitsubishi D Timing Belt [givio]
Nov 01, 2009 (9:02 pm)
I just replaced a timing belt on a 2001 Mitsubishi D,3.5L V6, you will need to replace the water pump as well.The timing belt drives the water pump.
Manufacture suggest replacing water pump!
Also look at your tensioner,it may need replacing also.
Make sure you adjust the timing belt tensioner correctly,or it will cause premuture
#13 of 13 Re: 94 Diamante Timing belt [peter931]
Nov 01, 2009 (9:06 pm)
Someone set the timing wrong, go back and reset the timing using the #1 spark plug!Run the #1 piston to Top Dead Center,and then install the timing belt!
It sounds like someone set the timing using the #4 plug!