Ask the Car People.SM


2002 Pathfinder blower motor resistor broke

34 messages,  Last post on Dec 10, 2011 at 11:03 AM

You are in the Nissan Pathfinder Forum.

What is this discussion about? Nissan Pathfinder, Heating / Cooling, SUV

Messages Page 4 of 4

#31 of 34 Re: Blower in a 2002 Nissan Pathfinder [lisaspon] by mrpathfinder

Jul 28, 2011 (10:37 am)

Replying to: lisaspon (Mar 16, 2011 6:46 pm)
My blower work on high and off for a few months. Then just on high for about a month.....then it quit. I replaced the A/C heater blower motor resister $54. It didn't fix it.
 
still debating what to do.....thinking about putting in new blower....$150.00......lot of money to waste if it don't fix it.

#32 of 34 Pathfinder 2002 blower by darrell_h

Sep 24, 2011 (4:47 pm)

Any MOSFET with a voltage rating greater than 50V (For the 12V automobile voltage plus a voltage spike at turn-off) and less than 0.7 Ohm will work. I'm installing an IRFB4310 just because I had a bunch of them for my own business. This MOSFET has 0.0056 Ohm of resistance compared to 0.7 Ohm of the original NTE2393. You have to put a shim in if the MOSFET that you find is smaller, and pretend you have tiny Indonesian fingers to get the little thermal sensor back under the clip but, it can be done.

#33 of 34 Re: Blower in a 2002 Nissan Pathfinder [mrpathfinder] by mudbud

Dec 09, 2011 (2:10 pm)

Replying to: mrpathfinder (Jul 28, 2011 10:37 am)
I'm having the exact same experience with my 03. So far I've replaced the resistor. How did your problem work out?

#34 of 34 Re: Blower in a 2002 Nissan Pathfinder [mudbud] by tjlane

Dec 10, 2011 (11:03 am)

Replying to: mudbud (Dec 09, 2011 2:10 pm)
We ended up replacing the amplifier Luckily we found a part at a local pull a part place so it didn't end up costing us the $125 it could have.

Messages Page 4 of 4

To POST a message, please Sign In.

Advertisement

Browse by Category

Browse by Vehicle
   View All Vehicles

Browse by Board
Browse by Topic
View All Topics

Edmunds Community

Advertisement