Last post on May 22, 2012 at 7:26 PM
You are in the Ford Windstar
What is this discussion about?
Ford Windstar, Engine, Van
#42 of 71 Re: 2002 Windstar MAF and Intake problems [slms1]
Feb 15, 2009 (3:16 pm)
I had a similar problem and replacing the spark plugs fixed it for a short while. One of the spark plugs was dirty, the problem went away after it was replaced.
#43 of 71 RE: 2002 Windstar MAF and Intake problems
Feb 16, 2009 (7:41 am)
We did a tune up on Thursday, the plugs were dirty, didn't help. The car started acting up again. We had it at the mechanics on Thursday morning, did a smoke test and there were no leaks, but it is an obvious vacuum issue. I spoke to someone Saturday night that told me its the lower intake, this leak doesn't show up on a smoke test. He said there is a rod that goes through the lower intake and it has something like a neoprene sleeve around it. The sleeve wears out and slips into the manifold causing the leak. He thinks replacing this will take care of the whole problem. I can't talk my husband into buying a new vehicle and this is at least a $600 repair I am told, on top of the $1000 we have already sunk into it. I will let you know if and when we repair it, if it was the problem. All I know is I am ready to junk it, I don't want to be on the highway with kids in tow and breakdown.
#44 of 71 2000 Windstar burning oil
Feb 17, 2009 (4:22 pm)
My WS was idling rough so I got a tuneup and oil change 100K miles. A couple of weeks later the oil light came on; I checked and I was almost dry.
Took it back to the mechanic who said I need a valve cover kit.
Took it to another mechanic today who agreed with the first guy's diagnostic code (vacuum seal leak?) but he says I'm losing too much oil for the valve kit to fix the problem.
Expl: I put in 2 quarts 3 days ago and today I've lost a quart of it.
Mechanic #2 fears the problem is in the motor but won't know until taking things apart (costly).
Does anyone have any advice?
#45 of 71 Re: 2000 Windstar burning oil [bwomack1]
Feb 17, 2009 (6:43 pm)
I agree with you on costly. I found out from several mechanics that this rough idling thing that I am experiencing was also causing my engine to leak oil. They told me a that a vacuum leak in the manifold can cause oil to leak from the engine. We only replaced the upper manifold and no leaking now, but still rough idling. I spoke to another mechanic, again and he said if and when we replaced the upper manifold, if we didn't clean out the EGR valves then this could be cause enough for the rough idle. So one night this week we are going to try this and see if it will fix it. My advice, I know dealers are expensive, but after talking to this last guy, our neighbor who we just found out is a Ford mechanic, said it is totally worth it to at least come in and get a diagnosis for $90 and they can pinpoint the problem and tell you how to fix it if you want to save yourself lots of money.
I will let you know how this all turns out for the idling problem.
#46 of 71 1995 Ford Windstar GL 3.8 HELP
Mar 10, 2009 (6:31 pm)
Van was sounding like a truck, idleing crappy, like an idle surge. Husband put in a new flex pipe after the cat. The sound went away but the van was still running rough. Idle when in park is like vamps up, vamps down. Not a continus smooth idle. While driving it has no pick up, when taking off from a stop at times it stalls out. Engine light came on and my husband then replace the air filter, gas filter, and then the engine light went off and remained off. When on highway and trying to pass or climbing a hill at top speed it bogs down but there is a whineing sound. He changed the transmission fluid and filter and put transmission lucas in it. He also adjusted the idle speed screw and it ran a little bit better for a week and then it started acting up again. He adjusted it again today, did a vacmune check on egr valvle OK. and gas pressure regulator. was OK as well. the idle still not smooth but driving is alittle bit better and no stalling at stops signs when i take off. He also changed the crank sencor no change.. Ok so HELP what is the heck wrong with it.
#47 of 71 Re: 1995 Ford Windstar GL 3.8 HELP [rgrandam1]
Mar 11, 2009 (3:02 am)
Try cleaning or replacing the ICV.
#48 of 71 1993 subaru legacy L wagon awd
Mar 11, 2009 (9:57 am)
Hello I have no reverse I have all forwad gears ok reverse not engageing. Ichanged fluid and filter. The owner just realized that the reverse took longer to engage for a while then when I moved it to change fluid the reverse was not there. Please can anyone tell me what could ti be Thanks
#49 of 71 1997 Ford Windstar 3.8 engine leak
Mar 11, 2009 (9:15 pm)
I have a 1997 Ford Windstar with a rebuilt engine. Because of engine corrosion and gasket problem the engine leaked and failed. I had it rebuilt but the problem has arisen again. The leak is somewhere under the timing cover I think. I tried a silica leak stop solution put in and that solved it for a couple of months. Is there anything that is better for my situation?
#50 of 71 Still rugh idle
Apr 12, 2009 (9:46 am)
Hollo there I'm sorry took so long to get things done. Now i have done thus far is replaced lower inatake gasgets upper plenum gasgets, new EGR,new IPS,new MAF,new plugs,wires,new CRKS,new CAMS,ICV, gas filter air filter, and just yesturday Sat 4/11/2009 comprsstion check all cyls are at 175to180 psi. Still have rugh idle allite more power still have od problem press to floor will go into passing put boggs down instead ove a bust. Ck engine finaly came on now I'm getting code p171 lean bank 1.thats it . Thanks Richard