13 messages,
Last post on Jul 28, 2008 at 6:34 AM
You are in the
Chevrolet Blazer Forum.
What is this discussion about?
Chevrolet Blazer
#9 of 13 Re: Can the dash lights be replaced?? [jpmccr]
by jlflemmons
Jul 15, 2008 (2:10 pm)
yep, the lights are replaceable. The instrument panel will have to be removed, as will the climate control head. There are usually little twist sockets from the back that are removed with the bulbs in them. Replace the bulbs and you are good to go.
The radio lights may not be quite as easy, but the radio is easy to remove and you could then take it to a repair shop and have them replaced.
#10 of 13 Re: Can the dash lights be replaced?? [jpmccr]
by duntov
Jul 15, 2008 (4:46 pm)
I replaced the "bug" lights in my 1991 S10 Blazer temperature conrol panel yesterday. Two screws hold the panel to the dash and are located underneath the control panel. . Remove the two screws and the panel assembly lifts out.Pull out the assembly until you can access the light bulb sockets. The two sockets in the light harness accepts two #194 bulbs..Reinstall the temperature control panel in the resverse order that you removed it.
Jul 26, 2008 (4:03 pm)
My dash lights are out, but I can see the mileage and the dome light works. No dash lights at all, radio works.
Fuses are fine...I am so confused. What could this possibly be? It is really a hassle driving at night and not being able to see how fast I am going!!!
HELP!!
#12 of 13 Re: No dash lights [blazerwoes]
by ncslater
Jul 26, 2008 (6:18 pm)
I know this is going to sound silly but have you checked the dimmer on the left side of the dash? the only reason I ask is that it happened to me one time when I got in that I bumped it somehow and it dimmed the dash to nothing when everything else still worked. Hope this helps.
#13 of 13 Re: No dash lights [ncslater]
by blazerwoes
Jul 28, 2008 (6:34 am)
Yes, unfortunately I have checked that. I keep re-checking it too, hoping somehow it will magically work.
I know it has to be something simple that I can't get my brain wrapped around.....
Thanks for your help!